M

Mac57

Supporting Member
TJ whisperer From Canada eh
Messages
149
Reaction score
192
Joined
Last seen

Latest activity Postings Images About

    • M
      Mac57 replied to the thread No crank, no start. Out of ideas..
      Go back and remove the ignition repair you did. Then dig a little further into it looking for other damage that may not have been very...
    • M
      Mac57 replied to the thread 2000 Wrangler swaying side to side will driving.
      That's a stock pitman, leave it. Your wandering issue is very likely alignment related, less likely tire related. Follow cpwolf's...
    • M
      Mac57 reacted to cpwolf's post in the thread 2000 Wrangler swaying side to side will driving with Like Like.
      I got no problem with that, but he has stock control arms, and a 4 inch lift. His Caster is most certainly way below what it should be...
    • M
      Mac57 replied to the thread 2000 Wrangler swaying side to side will driving.
      Free things to try first are switching your tires, the fronts to the back, backs to the front. Also experiment with tire pressure. 22psi...
    • M
      Mac57 replied to the thread No crank, no start. Out of ideas..
      Was it starting fine until that thief drilled out the ignition?
    • M
      Mac57 replied to the thread Wiring a kill switch (while running).
      Is it as simple as pushing the button again to make it shut off?
    • M
      Mac57 replied to the thread HVAC blower motor not working.
      As these blower motors age they draw more current which then fries things like resistors and switches. You found that out, replaced the...
    • M
      Mac57 replied to the thread Rough Idle.
      You had a CEL which led to cats being the issue, they were replaced. I'm thinking the computer was altering the air /fuel mixture with...
    • M
      Mac57 replied to the thread Rough Idle.
      First, cheapest, and easiest step is to grab some throttle body cleaner and clean your IAC and throttle body. See procedure in the how...
    • M
      Mac57 replied to the thread Where did I go wrong painting bumpers?.
      I'm wondering if the Dawn and/or Simple Green left something on the metal surface to affect adhesion of the primer. Never used either of...
    • M
      Mac57 replied to the thread Towing this pig.
      No, bad idea. Your connection should be direct to the frame. Can't imagine a reputable shop doing this anyway knowing you'll be using...
    • M
      Mac57 replied to the thread Towing this pig.
      Trailer over flat towing every time. Gives you so many more options to tow other things around too and saves wear and worries associated...
    • M
      Mac57 replied to the thread Routing intake through cab?.
      If you want a higher, cooler and drier air intake location running into the cab through the old A/C line holes in the firewall isn't...
    • M
      Mac57 replied to the thread RockHard Sport Cage Floor Mounts and Frame Mounts.
      The sport cage is already installed, somewhat, I suspect you already know it's not a true roll cage and has it's shortcoming. As you are...
    • M
      Mac57 replied to the thread HVAC fan won't blow.
      What switch did you replace? Losing the lower fan speeds and having only high speed is the classic symptom of the resistor frying. Check...
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back