Latest activity Postings Attachments Images About
-
-
aidanm replied to the thread Harland Sharp Roller Rockers.Did you use the 1.6 ratio or the 1.7? -
aidanm replied to the thread Harland Sharp Roller Rockers.But you kept all stock internals?
-
I would take a look at the grounds in the engine compartment first looking for loose or oxidized connections. You should also look at...
-
Hi all, so I just did my motor swap from an 02 auto to my 02 5 speed and lately I’ve been having a passenger blinker issue, the blinker...
-
aidanm replied to the thread Using ratchet strap to get front upper control arm in.Yeah it does, thanks
-
aidanm replied to the thread Using ratchet strap to get front upper control arm in.I could get it started, just couldn’t get it through the other side, but thanks
-
aidanm reacted to macleanflood's post in the thread Using ratchet strap to get front upper control arm in with
Like.
Loosen all the control arm bolts, sure... don't disconnect unless you really want to have fun! Sometimes you can rotate the axle with a... -
aidanm replied to the thread Using ratchet strap to get front upper control arm in.Anything I need to disconnect to make it able to move more?
-
aidanm posted the thread Using ratchet strap to get front upper control arm in in TJ General Discussion.Hi all, so I recently put a new motor in my 02 TJ and had to remove the passenger upper control arm(stock arms) to get the mid pipe out...
-
aidanm replied to the thread Confused on pilot bearing and clutch alignment tool.So I’m also trying to do a motor swap of a 02 auto into another 02 nv3550, what all needed to be changed over?
-
aidanm reacted to Woodrow's post in the thread Bilstein 3 softer riding shocks part numbers? with Like.
To respond to OP's original question: I do know that Bilstein makes some of their shocks with different valving (though I can't give any...
-
aidanm replied to the thread Bilstein 3 softer riding shocks part numbers?.Black max’s don’t have the best quality either
-
aidanm replied to the thread Bilstein 3 softer riding shocks part numbers?.Yeah but ranchos aren’t exactly known for their quality
-
Hi all, so I’m planning on getting 3.5”(rock krawler) front springs and 3”(Rockjock) rear springs and have been doing research on...
-
There are differences in the CPS for a manual transmission and automatic transmission most likely due to the flywheel and how the CPS...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…