CharlesHS's latest activity
-
-
CharlesHS replied to the thread Perhaps the last new OEM radiator.Congratulations on the find... That is the same factory radiator in original box that I purchased 2.5 years ago as a spare since the OEM...
-
CharlesHS replied to the thread Install of spring lift same labor as BB / spring spacer install?.Several year ago I was trying to restore the ride height of the sagging OEM springs in my '01. I had your same scenario and comparing...
-
CharlesHS replied to the thread MAP sensor air fitting.I have found 90* rubber fittings at the local AP store OR you can use vacuum tubing that can be purchased at the AP store.
-
CharlesHS replied to the thread Sluggish Acceleration.A thorough examination of the valve seats, lap the valves to the valve seats and replace the valve stem seals while the valves are...
-
Pull the head. At a minimum lap the valve and replace the seals. Alternatively go nuclear and have a machine shop go through the...
-
CharlesHS replied to the thread Sluggish Acceleration.Yup.... You have a leaking valve... and that is at least part of your power loss.
-
CharlesHS replied to the thread Tea kettle whistle during cold months (suspect a manifold leak) how easy is it to find and tighten the bolts?.Yes.... that is the sequence.
-
CharlesHS replied to the thread Tea kettle whistle during cold months (suspect a manifold leak) how easy is it to find and tighten the bolts?.The torque spec on the intake and exhaust manifold bolts 23- 24 ft lbs. Most are easy to get to except a couple below and here is a...
-
-
The downstream O2 reads fairly consistent .7-1. The plugs and coil pack was 3 months old. I got a warranty coil pack and purchased 3...
-
CharlesHS replied to the thread O2 Sensor Irratic Voltage Readings.To determine if the injector(s) are part of the problem you can swap injector on cylinders 1& 3 with injectors from good running...
-
I would have contacted TW, Shawn emails back quickly, and seen if that can be corrected. That’s just me, because I know he would help...
-
CharlesHS replied to the thread Sluggish Acceleration.Did you just do a compression test or a leak down test ? The leak down test would tell you if the exhaust or intake valve was leaking...
-
CharlesHS reacted to futhgar's post in the thread Issues with Passenger Side Marker Signal Light with
Like.
So - looks like we had a bad socket after all. Replaced and everything is working fine now! Next thing will be figuring out why the fog... -
CharlesHS replied to the thread Issues with Passenger Side Marker Signal Light.The TJ Resources downloadable PDF of the FSM is great for electrical troubleshooting. Glad you were able to get the problem resolved.
