CharlesHS's latest activity
-
CharlesHS replied to the thread TJ battery draining when not in use.You can disconnect the ground cable to alleviate that problem for long term storage OR you can troubleshoot to determine which circuit... -
CharlesHS replied to the thread Axle u-joint: is axle nut mandatory?.https://www.amazon.com/dp/B0015UWVKQ/?tag=wranglerorg-20
-
-
It is far more difficult to leave the unit bearing attached to the stub shaft for a u-joint replacement than any other way. Pull it out...
-
-
CharlesHS replied to the thread Rhythmic Vibration at Highway Speed.Do you know whether Spicer U joints were used or cheap Chinese knocks off from the local AP store ? Even though the U joints were...
-
CharlesHS replied to the thread Reverse light LED.I bought a set of those LED reverse lights when @Claytone posted them For Sale early last year.... They are a projector style LED with a...
-
-
Not sure if he is making them anymore due to supply but @Claytone makes a hell of a reverse light
-
Line the tail lite with aluminum tape...
-
CharlesHS replied to the thread Looking for a list of good and trusted TJ radiators.The decrease in the availability of OEM Mopar parts is the reason why I have purchased spare parts in the past as they became available...
-
CharlesHS reacted to Shawn at Tom Wood's's post in the thread Broken driveshaft bolts with
USA Proud.
You should replace the yoke. Even if you get the bolts out the yoke is likely damaged/distorted which will cause the joint in the new... -
CharlesHS replied to the thread Finally Found My TJ.Outstanding find... Congratulations on the purchase. I am sure you will be happy with your purchase for years to come... I would...
-
CharlesHS replied to the thread Blower motor won't come on.IF you are referring to the green wire between Connector 1 terminals B and E (12 ga); that is the ground that goes thru the model...
-
CharlesHS replied to the thread Broken driveshaft bolts.If you are going with the approach of measuring the exposed threads; I would take that measurement one step further and measure with a...
-
CharlesHS replied to the thread Tail gate seal size and fit.Since purchasing my '01 over 3 years ago; I started a storage locker for spare Mopar OEM parts. As I find Mopar OEM parts online I...
-
CharlesHS replied to the thread Tail gate seal size and fit.Can't speak for the Crown Automotive seals..., but the Mopar OEM tailgate seal purchased 2 years ago and installed on my '01 last summer...
