CharlesHS's latest activity

  • CharlesHS
    CharlesHS replied to the thread Has anyone ever used Seafoam spray?.
    A long time Jeep technician friend recommends the Mopar throttle body cleaner 68628279 AA.
    • 1769338377392.png
  • CharlesHS
    CharlesHS replied to the thread This beauty joined the family today.
    CONGRATULATIONS..... Good looking Jeep.
  • CharlesHS
    CharlesHS replied to the thread One SKIM key works, the other one doesn’t.
    When I first had the SKIM module installed and the ECU programmed by my Jeep dealership friend; the bad chipped SKIM keys were all that...
  • CharlesHS
    CharlesHS replied to the thread One SKIM key works, the other one doesn’t.
    My key was exhibiting the exact same problem approximately a year ago. There were times the engine would start and run; after several...
  • CharlesHS
    CharlesHS replied to the thread NTK 23151.
    IF you decide to order the O2 sensor(s) from Rock Auto; I would call them to ensure they actually have them in stock... Not that you are...
  • CharlesHS
    CharlesHS reacted to GregBelleville's post in the thread NTK 23151 with Like Like.
    Rock Auto is showing Mopar 02s in stock, they're expensive, but should be more trustworthy.
  • CharlesHS
    CharlesHS reacted to macleanflood's post in the thread NTK 23151 with Like Like.
    Walker worked perfectly in my 2001 F250/V10. Didn't work in my 97. Nor did a new NGK. A used NGK out of a 2000 Sahara I was parting out...
  • CharlesHS
    CharlesHS replied to the thread NTK 23151.
    You could try Bosch 23151 or Denso 234-4592 which are listed to replace the 23151...
  • CharlesHS
    CharlesHS replied to the thread Motor mounts.
    Always enjoy hearing how Jeep owners get creative when working on their Jeeps. (y)
  • CharlesHS
    CharlesHS reacted to Moglocker's post in the thread Motor mounts with USA Proud USA Proud.
    I didn’t put anything on the oil pan,I used a piece of pipe,in a floor jack placed on various places on the block,not a hard job at all...
  • CharlesHS
    CharlesHS reacted to Rosco1216's post in the thread Crank but no start with Like Like.
    No it’s always been garaged. There is no mice anywhere in my garage as I have 2 mice hunters.
  • CharlesHS
    CharlesHS replied to the thread Crank but no start.
    Is the Jeep stored outside ? After a month of sitting you might have a problem with mice chewing thru wiring insulation...
  • CharlesHS
    CharlesHS replied to the thread Crank but no start.
    Please read my response #4 above; this may assist your with your problem .... Do you have access to a digital multi meter to do some...
  • CharlesHS
    CharlesHS replied to the thread Motor mounts.
    In the past when I changed the motor mounts on my '98 XJ I used a floor jack and a piece of plywood under the oil pan to support the...
  • CharlesHS
    CharlesHS replied to the thread Air Vent Replacement.
    • 1768829297865.png
Show older items
Top Bottom
Back