Recent content by dcoop

Here are the phone numbers 732-349-4200 305-278-2560 781-319-3000

In the process of changing out motor mounts and trans mount. Got lucky today and picked up 2 mopar motor mounts and also found two mopar tranny mounts but not going to spend that much on a tranny mount. Is Anchor the nexted best option? I've searched and get all kinds of mixed reveiws.

I had mine mounted to the bar behind the drivers seat in the plastic clamp it came with. Piece of crap. Its popped lose a few times, and even the key wouldn't stay in. So back in October while at an offroad park on a steep rocky section it came loose and fell in the floor board (which I didn't...

When I bought my 01 tj it used to take me 15 mins or more to fill up. I ended up pulling the filler hose off the tank and in the neck of the tank was what looked like a ping pong ball and a long spring. I didn't have to drop the tank either. I guess it was for fuel spillage if you flopped over...

I'll be there on Oct 8, 9 and 10. If I can swing the 23rd I'll head down.

If you ever make it to Clayton might as well go hit Hot Springs offroad park. It used to be called Superlift offroad park. I've been to Clayton a few times.

Had one of the local offroad shops bend it back and box it in.

Mine use to look like this. It's fixed now and new currie track bar.

If you can hear your your compressor coming on, and it should cycle off after 15 secs or so. Scotch the back tires, put it in neutral, jack up the front end and engage the locker and see if both front tires turn.

A winch..

Your tank should pop back to normal once removed from skid, mine did. Then I just took the trusty sledge hammer and whipped the skid back into shape. When I dented mine it pushed the pump out of the tank. I've done it twice. Now I have the savvy skid. No more problems.

I had a Tranny go out, it was a 700r4. Was working fine. I was going to have flushed with the machine. My buddy told me to just change filter and replace whatever drains out cause the machine applies more pressue to flush than the tranny pump. I don't know if its true, But I did it anyway...

While your in there go ahead and replace the other side.

My 01 does the same thing. I've have replaced everything and I can still smell it.