Gormy's latest activity
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I did this as part of the testing I just did above. I should have checked if that changed the resistance reading before I did...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I am probably misunderstanding your question because my mind is just spinning right now trying to take all this in, but I have a chance...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.That is frayed wire. It's the black wire in the back of the C154 connector by the transmission. As you read further you'll see...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Sorry to reply in such small increments, but I’m squeezing quick tests in around work tasks. Just a quick run to the garage and then...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Last night before I left the house for a bit (went and walked the beach a bit to let some of the stress of this Jeep go), I checked the...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Thanks for all the thoughts. I have added a picture I just took of the back of the harness with the connector removed again. I...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Thank you again! Okay, staying positive. I'm going to slow this down and do it right. One step at a time. Starting from the...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Well.... we're going backwards now. I fixed the broken wire by the trans, in what I believe is C154. I removed the ground cable that...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Sab, forgive me because I may really frustrate you here. I opened up the FSM and worked to track down all these connectors. I found...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.Sab, forgive me because I may really frustrate you here. I opened up the FSM and worked to track down all these connectors. I found...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I was thinking about this and it was going to be my next question. Can I splice a wire into the BL/TN wire at the engine ground and run...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I just tried doing this again. Took it off the firewall, sanded the ring eye connector and the bolt, sanded some paint off the firewall...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.It could be. But is there a simpler explanation that I am overlooking? This wiring harness started the Jeep last November just fine...
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I haven’t taken the loom off of all of it yet, but I did take it off at the junctions. Everything looks good near the ground bolt. The...
-
-
GGormy replied to the thread Working through final wiring issues on my build and I'm stumped.I just ran a jumper from the G105/107 ground bolt to the negative terminal and I have no crank, no start, and a NO BUS issue still. So...
