Strizzo's latest activity
-
Strizzo replied to the thread What did you do to your TJ today?.I have one of those .410 1100s. They don't make them anymore so values have jumped in the past few years. -
Strizzo replied to the thread Front lockouts or Yukon spin free hubs discussion.I ordered my 07 kit just after Christmas and it arrived on new years eve. I've opened it up and checked that all items were included...
-
Strizzo replied to the thread OEM 6-CD changer / radio.I purchased one along with an aux input setup and swapped it in about a year ago. It works well for what it is, lets me play pandora or...
-
Strizzo replied to the thread Need a quick fix for my driveline angle.For now, washers. If you want a more permanent temporary fix, I have the tcase drop kit laying around the garage somewhere i'll send...
-
Strizzo replied to the thread Metalcloak T-Link Steering.I will admit I am a fan of most of the MC stuff, in fact almost all of my suspension is MC, and I don't see a reason for the MC T-link...
-
Probably, but as a traction improver, it barely qualifies.
-
Strizzo replied to the thread Two mysteries.rent/borrow a cooling system pressure tester from the parts store and check your radiator cap. If it isn't holding pressure, you'll...
-
Strizzo replied to the thread Dana 44 Deal - Yay or Nay?.Weren't the Unlimiteds typically LSD 44s as well?
-
Strizzo replied to the thread Thoughts on these JL wheels for my silver TJ.Picked up a set of 5 JLR wheels with new 33" KO2s for $900. This is running 2" adapters, and they sit flush on the 6" metalcloak...
-
-
Strizzo replied to the thread What’s the best rear track bar relocation bracket?.I have a JKS, and actually have another since i accidentally ordered two trying to compare shipped cost. If you want a JKS hit me up...
-
Strizzo replied to the thread Rear differential vent missing.The axle vent bolt is still available from mopar or aftermarket as well. The hole in the axle tube is threaded and like everyone said...
-
Strizzo replied to the thread Dana 44 Deal - Yay or Nay?.If you're already planning on gears, a locker, and shafts, the end result will be more than $500 better if you start with the Dana 44...
-
Strizzo replied to the thread Front lockouts or Yukon spin free hubs discussion.I have also been thinking about this situation, as my plan is eventually for 35s, and I started looking at where one could get one or...
-
Strizzo replied to the thread Distribution block mounting location ideas.The ABS tray is where the sPOD has you mount the distribution/solenoid block. If you don't have ABS, its one of the easiest spots to use.
-
Strizzo replied to the thread Anyone using aftermarket front axle shafts?.When I had my lockers installed and regeared, i had the shop put in new yukon 4340 chromoly front shafts. They came slightly too long...
