Not all LJs are pre wired. If you do not have the servo connector, you’ll need that connector and also a C3 connector to scavenge some leads.
I recently added cruise control to my ‘05 LJ and followed the video below. If you watch the video and review the wiring diagrams until it all makes sense, it’s a fairly straightforward project. I picked up the connectors on eBay and the servo from Collins Bros.
Servo Plug
- Pin 1 to C3 Pin 12 (VT/YL)
- Pin 2 to C3 Pin 5 (VT/LG)
- Pin 3 to Brake Switch Pin 4 (VT/WT)
- Pin 4 to Ground (BK)
Brake Switch
- Splice into Pin 3 to C3 Pin 7 (VT/YL)
Clock Spring
- Splice into VT to C3 Pin 34
- DB/DG (Ensure Ground Exists)