Piecing together a 2 inch spring lift

OK done, thanks for all the recommendations!
IMG_20190601_181422.jpg
IMG_20190602_143505.jpg
IMG_20190602_144034.jpg
IMG_20190602_154952.jpg
 
  • Like
Reactions: mots
If you are using OME parts, the trackbar relocation bracket will hit the tub with the 20mm bumpstop extensions they give you. You really need 1.5 inch extensions. I suppose it is not so bad to hit the tub.but the harness to the fuel pump runs right where the relocation bracket hits and can be severed as a result. Hit a big bump and everything shuts down. Not good.
 
  • Like
Reactions: bobthetj03 and JakeQ
I'm adding the winch tomorrow, it seems like it will make the front sag a little. What can I do to regain the front height after the winch is on?
 
It will.

I stacked another spring isolator on top of the one I already had. They are about 3/4” thick.
 
  • Like
Reactions: JakeQ
Top Bottom
Back