Oregon Custom 97-99 York Compressor Bracket

York Compressor bracket kit for Jeep TJ with the original 4.0L layout and no A/C (1997-1999 and I believe it will fit Jeep XJs, not that that's super important around here). It comes with bolts and a correct length belt. (Technically 2 belts because I mixed up the stock belt and the w/ york belt. I've include both. )

It places the York Compressor vertically where the stock AC compressor goes on the upper passenger side of the engine. I didn't have much room, so it's as far to the driver side as I could reasonably put it, which causes the radiator hose to rub the bracket. I've included a shield that will protect the hose. I had a 1" MML and still had enough clearance hood clearance.

Does not come with compressor, clutch, or air system.

Will ship USPS priority mail anywhere in the lower 48 US for +$15.

jesseshoots said:

Was there anything that needed to be done to the stock airbox to work with this?

Click to expand...

I had a cold air, so I'm not 100% sure, but I think there should be plenty of room. I think you probably have more room than I did. I'm adding some more pictures to the OP. You can measure though since you have the air box.

Find the 4 mounting bolts for the A/C compressor. (Left = passenger) The left edge of the York will be 2-1/8" farther left than the center of the left pair of compressor mounting bolts.