Pics of rear brake lines and brackets on 03-06 Rubicon

Ante_Up

Ante_Up

TJ Enthusiast
Supporting Member
Joined
Jun 3, 2019
Messages
391
Location
Oklahoma
I'm installing a rear Dana 44 out of an 06 into my 97. The brake lines were messed up when I had some welding done so I'm going to be making my own brake lines. That being said, I need to see pics of the factory setup at the tee and the brackets where the hard line connects to the brake hoses please
 
If you pm me tomorrow later I can send pics ...I have an 03 and 06 Rubi. May need to send phone to phone since I have droid.
 
  • Like
Reactions: Ante_Up
Not sure if this helps.
1601292668170.png
 
  • Like
Reactions: Ante_Up
Yep thanks.. That definitely helps. I'd still need to see the bracket and tee locations pics though. I want to see the stock attachment compared to my axle since my spring perches and CA mounts are aftermarket
 
Ante_Up said:
Yep thanks.. That definitely helps. I'd still need to see the bracket and tee locations pics though. I want to see the stock attachment compared to my axle since my spring perches and CA mounts are aftermarket
Click to expand...

Not sure if these help. mines a triangulated setup with disc brakes. The lines and brackets are unmodified though.
1601297376531.png


1601297206460.png

1601297317914.png
 
Last edited:
  • Like
Reactions: Ante_Up
That's exactly what I needed... The CA mount on mine is likely too close to where the tee mounts, so unfortunately I may have to come up with a different mounting option, or mount it at an angle to allow room for the brake line.

PXL_20200928_135237266.MP.jpg
 
Top Bottom
Back