Adding a 2" could spring spacer to OME lift
- Thread starter Cidamli7
- Start date
Oklahomacheapjeep
Member
I mean you probably could run 2 inch spacers but You’d almost certainly need new shocks. If your wanting to run 33s I’d suggest a .5 or .75 inch spacer and a 1 inch mml and body lift.
.. i try to see my tj more agressive, thats why try to put bigger tyre .. so i dont need to change rear axle for 33’s
That will work as long as you're planning to add adjustable control arms and either a sizable transfer case drop or a SYE / DC driveshaft combo.
Personally the better option would be to either add 4" springs and what I mentioned above, OR a 1.25" body lift, 1" MML, and a .75" coil spring spacer.
Personally the better option would be to either add 4" springs and what I mentioned above, OR a 1.25" body lift, 1" MML, and a .75" coil spring spacer.
Add a 1.25" BL and be done with it. You can't just add spacers and nothing else.
p.s. Ditch those Bushcracker pocket flares for more clearance.
p.s. Ditch those Bushcracker pocket flares for more clearance.
Last edited:
Hi guys..İ have already 2 inch oldman emu lift kit on my tj and 31’s .. now i want to put 2 inch coil spacer and 33 ‘s tyre.. so will have i anyproblem about comfort or anythings ? Thanx for helping..
you will have problems if you do it that way. Just add a 0.75” spacer and a 1.25” body lift. Much simpler
you will have problems if you do it that way. Just add a 0.75” spacer and a 1.25” body lift. Much simpler
You DON'T need a MML to do a BL. Most good BL kits come with the fan shroud relocation brackets.
If you like the ride quality on the springs you have then adding a spacer or body lift shouldn't harm the ride. As said, longer shocks will probably be needed. But if you are just going for looks and don't plan on anything rougher than a two-track you might even get away with what you have. Your up/down travel will change is all. And if you get vibration problems a transfer drop or motor mount lift might be all you need.