Search results

As I posted earlier... there is a ground behind the radio that is attached to the metal framing for the dashboard.

In Florida IF you don't like the weather.. Just wait an hour... ☀️☁️🌧️⚡

Before purchasing the aftermarket radiator; do a quick search for an hour or so and you might be surprised. While the Mopar OEM radiators are getting difficult to find; they are not impossible to locate. I was able to locate a Mopar OEM radiator a while back as a spare. This radiator was in...

With the exception of the tracbar tie rod end the sway bar links can easily be shipped. The contaminated brake drum may be caused by a leaking brake wheel cylinder OR an axle seal. Locate a few Jeep owners in your area and get a wrenching party together.

Check the Multi Function Switch wiring inside the steering column (unscrew 3 screws to remove plastic column halves) Check the G201 Ground which I believe is behind the radio connected to the metal dashboard support. These schematics for the Instrument Cluster back lighting should assist you in...

Recommendations vary on the manufacturer, but 10W/30 would be recommended.

Well said.....

This not what I did to my Jeep, but what I did for my Jeep. I decided to upgrade one of my tools. The Scan Tool that I had been using for years capabilities were seriously out of date. After searching around online for a while I ordered an Autel MaxiCOM MK808S (2026 version) for $380.. NOTE: I...

What are the alignment specs (caster) on your Jeep after the lift OR have you had the front end aligned since the lift installation ?

Factory Service Manual 8D-20 Ignition System; coil resistance for your year TJ 4.0L.

You are driving a 1999 4.0L A/T according to your profile. Check to see if the coil windings are open due to heat. Verify the fuel pump can be heard running for 3-5 seconds when the ignition is turned to Start. Shift transmission to N and retry starting.

LEDs in a glass housing... is desirable over plastic. I would be interested to see the beam of light it puts out at night. Many LED headlights just dump light in front of the vehicle instead of focusing the beam.

Have you searched on TOYODIY and Amayama for your Samurai parts ? I have had good luck finding parts for my 1993 LC P/U 3.5L diesel.

Selling these Rigid Industries LED lights (202113) with wiring harness. They are four bulb 30W LED lights (3"x3") that are in very good condition and work flawlessly. UPDATED: Asking $90 plus shipping. You can contact me at: cstein51@gmail.com

Approximately 6 years ago I built cables for my '01 TJ with left overs from a previous XJ project which consisted of 2 ga flexible fine stranded cabling, fusion connectors, military terminal clamps and thick mil shrink tubing (glue inside). Prior to installing the cables in my '01 TJ I shielded...

That connector is probably for the optional Daytime Running Lights.

There are several companies that make upgraded cable kits; here is one of many. https://www.jeepcables.com/products/tj-big-7-complete-kit-wrangler-97-06

When the control arms were replaced and the bolts tightened; was the Jeep up in the air with the differentials hanging OR was the Jeep on the ground ? IF the differentials were hanging and you tightened the bolts; the control arm bushings would be preloaded when the Jeep was returned to sitting...

Just watched this video of Jay Leno and his Jeep "Ford" GPW. Some of you may have already watched this, but thought others would be interested.

While you may have not had any problems; that connection point would not be my first choice. I would go direct to the battery or the route macleanflood describes above.