rear driveshaft

  1. J

    Improving 42RLE rear driveshaft angles by removing / modifying the transfer case adapter?

    So as the title implies, is it possible to remove/modify that adapter plate or even the 43rle output shaft to mount NP231 closer to the front of the car? Got this idea when i was rebuilding the NP231 while doing the SYE, that adapter seems kind of huge and mostly filled with empty space.....i...
  2. jaaylynch

    Engaging 4x4 keeps pulling driveshaft out rear diff and breaking stuff

    Hey guys, so i have a 2000 tj sport and the last 2 times i tried putting it in 4x4 it pulled the rear driveshaft out and shattered my transfer case, most recent time it popped out and is still in but there is play in the pinion seal and driveshaft is just spinning inside the differential and...
  3. Tim_with_the_tj

    U-joints: Did I do it right?

    Alright, this was my first time ever replacing u-joints so take it easy on me. Stock rear driveshaft. Does this transfer case side u-joint look too tight? It isn’t difficult to move at all. It just feels snug. Ignore the mess…wait for the end of video. I used the thinnest clips that were...
  4. Weasellee

    What driveshaft do i “need”?

    Gonna attach a photo of my current stock shaft with 4” Currie lift springs on my ‘04 LJ Do you think i need to go with SYE and CV shaft or it seems to me just a proper length stock “style” non cv shaft will be fine due to the not so heavy of my pinion angle i know Tom woods will sell me...
  5. David2000sportR1

    Knocking sound from rear driveshaft area

    Hello was hoping some of you jeep wizards can help me out I have a 5.13 geared dana 44 with a rear locker on 35s it’s geared so high for me I actually use second as first gear upon take of there is a knock coming from the rear of the Jeep I have an Adam’s drive shaft I took off and have found...