SOLD Black half doors

Status
Not open for further replies.

nk24

307 ► 602
Supporting Member
Ride of the Month Winner
Joined
Jul 6, 2017
Messages
1,038
Location
Phoenix
Price
$350
Location
Phoenix, AZ
At the moment I’m not interested in shipping these. Local pickup in Phoenix near 44th St and Thomas Rd.

OEM black Mopar half doors. No uppers, windows, or mirrors. No keys either, but rekeying to match your Jeep key is fairly simple.

I bought these as a project and just don’t have time or space.

Decent condition considering they are 25 years old. This set has a VIN from 1997. Some of the screws are missing on the interior panels, so a bit of work is required. Price reflects that.

Exterior is in decent shape. Panels are straight, no dents.

Interior panels were originally gray but have been painted black by a previous owner and some of the paint has worn off. Passenger side pocket was cut up for some reason.

Exterior and interior handles work well. Seals are in good shape. Door straps are in good shape.

Great for trail doors or for a restoration project.

I have these listed elsewhere for $400.

Will consider trades for Spidertrax wheel spacers, Savvy front or rear bumpers, or a Savvy 241 transfer case cable.

69852E9C-43ED-4DAE-A75B-673D02C3E46C.jpeg
4C4FAEB5-DE94-4744-8C8F-C5124304931C.jpeg
71AC2036-900D-4105-B59B-B78BF9476E1B.jpeg
99D5862F-6040-4420-AC71-E3296920D64C.jpeg
75294FB1-3CF3-4788-A95B-CBFC79083B8F.jpeg
F840359A-A5B1-4E70-AAE3-9797884F0D2C.jpeg
57A6ABC7-82BA-4C6B-9C23-79FD8BBCA747.jpeg
 
Last edited:
and with my patented 4 step redneck interior panel repair method we can get that patched up in no time :ROFLMAO:

But seriously, it works, drywall screen forms the backer, overlap & contour the mesh over the area, slop on a tube of JB weld covering the entire section of mesh from the back, it'll anchor it to the sides and provide a stabile base for the next step, let it dry rock hard, then overlay the whole thing with JB Plastic weld, let it dry, sand, paint, voila, a true redneck panel repair for about twelve bucks:

Once you overlay the entire thing you can even dremmel out the oblong holes if you want, not sure how stable the end sections would be but as long as you don't abuse it I bet it'd last as long as the rest of the panel.

JB.jpeg
Drywall.jpg
JB Weld.jpg
JB Plastic Weld.jpg
 
Status
Not open for further replies.