Custom center cap emblems

[MountaineerTom]

Wasn't really sure whether to put this here or in the How-to section. I decided here because It's not really a how-to but more just info.

In May of 2018 I purchased these custom center caps. I didn't like the Looks of the one that came with my Pro Comp wheels. They have a clear domed surface, not just a flat sticker. For the price, I figured if they turned out to be crap, I wouldn't be out much. The beauty is you can get them in almost any diameter to fit whatever center caps you have. They had a couple other styles too, but I likes these simple ones. They have been on my Jeep for a year now and still look as good as the day I put them on. They come from Europe, so it took a couple weeks to get them.

Anyway, here's the info and pics. In the close up picture of my center caps, the Jeep one looks discolored or something. It's not, it was just hard to get a picture without shadows or glare.

https://3dcarstickers.com/product/jeep-3d-car-decals-for-wheel-center-caps/

 

[Fouledplugs]

Damn. That looks 100% better.

 

[dbbd1]

I like the center caps themselves too.
Where are those from?
Thanks.

 

[Fouledplugs]

I like the center caps themselves too.
Where are those from?
Thanks.

The link he used to purchase his is at the bottom of his post before the pictures.

 

[dbbd1]

The link he used to purchase his is at the bottom of his post before the pictures.

No, I meant the caps themselves, the industrial looking ones.

 

[Fouledplugs]

No, I meant the caps themselves, the industrial looking ones.

Give ProComp a call. I am sure they came with his wheels.

 

[MountaineerTom]

Give ProComp a call. I am sure they came with his wheels.

Yes, they came with the wheels. I think I’ve seen them for sale individually on different websites.

 

[Willys LJ]

Hmm..... They have Willys ones too....

 

[MaloStapalo]

Maybe its just me but I would laugh everyday if I had lambo center caps. Now i just need caps to stick them to.

 

[MountaineerTom]

No, I meant the caps themselves, the industrial looking ones.

https://www.amazon.com/dp/B003EP11KG/?tag=wranglerorg-20

 

[Brian.T]

I know it has been awhile since you had posted this, but I am wondering: How have the Jeep stickers held on and are they yellowing yet? Also, I see that on Extreme Terrain it says that the diameter of the Pro Comp Center Caps is 3.27 inches-- so, did you buy the 83mm 3D Jeep stickers or did you buy a different size?

https://www.amazon.com/dp/B003EP11KG/?tag=wranglerorg-20 really sure whether to put this here or in the How-to section. I decided here because It's not really a how-to but more just info.

In May of 2018 I purchased these custom center caps. I didn't like the Looks of the one that came with my Pro Comp wheels. They have a clear domed surface, not just a flat sticker. For the price, I figured if they turned out to be crap, I wouldn't be out much. The beauty is you can get them in almost any diameter to fit whatever center caps you have.

 

[MountaineerTom]

I know it has been awhile since you had posted this, but I am wondering: How have the Jeep stickers held on and are they yellowing yet? Also, I see that on Extreme Terrain it says that the diameter of the Pro Comp Center Caps is 3.27 inches-- so, did you buy the 83mm 3D Jeep stickers or did you buy a different size?

They have held on just fine. There is a slight yellowing since I installed them.

I can’t remember off the top of my head, but I think I ordered 40-something mm’s. I just measured the area of the center caps that holds the emblem with a caliper and just ordered them 1 mm smaller than that, if I remember correctly. The 3.27 inch diameter you seen was for the size of the whole center cap, to fit into the opening of the wheel.

I’ve been thinking about ordering a set for the center caps on my little trailer too. I’ll probably order bee ones for the Jeep too whenever I do.

 

[Dryfly]

Sorry to resurrect a slightly older thread, but I have the exact same wheels. It appears that you used your original center cap. Did you remove the old sticker / pro-comp alloy emblem or did you somehow go over the top of them? Thanks... I would like to order a set of these myself. Nice looking mod!

 

[MountaineerTom]

Sorry to resurrect a slightly older thread, but I have the exact same wheels. It appears that you used your original center cap. Did you remove the old sticker / pro-comp alloy emblem or did you somehow go over the top of them? Thanks... I would like to order a set of these myself. Nice looking mod!

Thanks.

I removed the Pro Comp emblem. Inside the center cap was a hole. I used a punch and pressed on the backside of the Pro Comp emblem to push it off. From my memory, they came off pretty easily.

 

[Dryfly]

Thanks! I placed the order this morning so in a couple weeks (presumably) I'll be replacing mine.