Montana TJ Unlimited parts magnet

  • Thread starter Cross-Threaded-06TJ
  • Start date
Glad I saved my oem body mounts, due to the info from this forum. I thought the daystar was good from my past experience. It is ok I suppose, but I would rather run the better combo.

Same with the zone coils, not junk at all. I just want to run the Currie coils.
 
  • Like
Reactions: Nickgsjeep and DuncLJ
Got the coils and trackbar and body lift switched out and alignment done, again.

Much better ride after going to these coils and body lift with oem pucks and savvy spacers.

20201024_092720.jpg
20201024_093656.jpg
20201024_111620.jpg
20201024_120530.jpg
20201024_120553.jpg
 
  • Like
Reactions: TJ Starting, Nickgsjeep and DuncLJ
Everything looks good bro. I'm doing a lot of the same things; replacing parts that aren't bad but aren't necessarily good either...lol.

With the other new parts you just bought, you're Jeep is approaching "Game Changer" status. Looking forward to seeing all the new mods. 🍻
 
  • Like
Reactions: Cross-Threaded-06TJ
You ever just sit in your Jeep and listen to music? I do.

I put the 14 year old soft top on this bitch today. Always a fight. I need a new top next year. Thankfully this has AC that works. Lewiston is bad for being balls cold in the morning and warm on the way home in fall and spring.
20201025_151145.jpg
 
  • Like
Reactions: TJ Starting, Nickgsjeep and DuncLJ
Jeep at the shop again. Blah, blah, blah Jeep parts. Metal cutting and hole drilling. MCE fenders and JK signals in the grille. 3/4" MCE LED signals inside the fender. Its been done before, but now I have it too. Took a while. Didn't get 1/3 of the shit done at the shop i wanted to. A friends precious hot rod truck started leaking fuel and I spent an hour fixing that. And then salesman needed little shit done.

Will stay at home tomorrow and try and work on the moryde gate and hood flute vent panel thing. More cutting up the pretty sheet metal.

Happy Halloween too TJ Jerks!

Pic dump for your eyeball viewing pleasure.


20201031_113055.jpg
20201031_113058.jpg
20201031_132644.jpg
20201031_132657.jpg
20201031_135311.jpg
20201031_150354.jpg
20201031_162049.jpg
20201031_162627.jpg
20201031_162635.jpg
20201031_162722.jpg
20201031_162652.jpg
 
  • Like
Reactions: Fouledplugs, JMT, TJ Starting and 3 others
Cross-Threaded-06TJ said:
Jeep at the shop again. Blah, blah, blah Jeep parts. Metal cutting and hole drilling. MCE fenders and JK signals in the grille. 3/4" MCE LED signals inside the fender. Its been done before, but now I have it too. Took a while. Didn't get 1/3 of the shit done at the shop i wanted to. A friends precious hot rod truck started leaking fuel and I spent an hour fixing that. And then salesman needed little shit done.

Will stay at home tomorrow and try and work on the moryde gate and hood flute vent panel thing. More cutting up the pretty sheet metal.

Happy Halloween too TJ Jerks!

Pic dump for your eyeball viewing pleasure.


View attachment 200046View attachment 200047View attachment 200124View attachment 200125View attachment 200126View attachment 200127View attachment 200128View attachment 200129View attachment 200130View attachment 200131View attachment 200133
Click to expand...
Flat fenders look great!
 
  • Like
Reactions: Cross-Threaded-06TJ
Cross-Threaded-06TJ said:
You ever just sit in your Jeep and listen to music? I do.

I put the 14 year old soft top on this bitch today. Always a fight. I need a new top next year. Thankfully this has AC that works. Lewiston is bad for being balls cold in the morning and warm on the way home in fall and spring.
View attachment 198629
Click to expand...
More than I care to admit 😂
 
  • Like
Reactions: Cross-Threaded-06TJ
MX952 said:
Watching closely from Orofino. Wanna part with your stock blue fenders? Also we have a crew that hits the North Fork for some deep snow wheeling you may get invited along with.
Click to expand...
The fenders were cut up to do the MCE's. But if you want/need the cut section you can have it. Let me know.

I'd like to be invited to snow wheel! Thanks.
 
Cross-Threaded-06TJ said:
Installed The Super Traxion's at lunch today. Straight from the 70's. Very popular with the ladies I was told. A splash of cologne and some Super Traxion's on your Jeep and you may get lucky.

7.00-15 Bias Ply's. :p Pretty close to what it came with stock, a pinch taller.

They balanced with minimal weight and were glass smooth up to 55 mph at lunch. 55 mph with that window down too. :cool:


View attachment 190523View attachment 190524

View attachment 190525

View attachment 190526
Click to expand...
You figured someone would like it? How about EVERYONE! This thing is crispy man. Very cool.
 
  • Like
Reactions: JMT and Cross-Threaded-06TJ
Top Bottom
Back