mrblaine
Crew Member From Quail Valley, CA
Latest activity Postings About
-
-
mrblaine replied to the thread 2006 LJ Rear Disc Brake Bleeding Issue.Doesn't matter much for the rear since a lot of pads only have the U on the end of one pad. Regardless of how we do it, what happens... -
It's not really difficult; it is actually a very simple system. The shuttle valve is a basic safety element used in nearly all vehicles...
-
mrblaine replied to the thread 2006 LJ Rear Disc Brake Bleeding Issue.I'm weary of finding incorrect info in the FSM. The plunger in the switch moves sideways, not up. The Switch does not have internal...
-
mrblaine replied to the thread 2006 LJ Rear Disc Brake Bleeding Issue.The system is about as basic and simple as it can get. What isn't quite so simple is a clear understanding of all the problems that can...
-
mrblaine replied to the thread 2006 LJ Rear Disc Brake Bleeding Issue.That is your clue that they aren't going to bleed correctly. The most likely culprit is the flex hose clipped to the rear upper control...
-
mrblaine replied to the thread Beadlock wheels and grade 8 bolts.My brain tickle says there is an interaction based on friction and load between the bolt threads and the threads in the cast aluminum...
-
mrblaine replied to the thread Is the TJ fuel cap non-vented?.Yes, it is a fully sealed cap. If it wasn't, we'd never see codes for large and small emissions leaks and the oft recommended suggestion...
-
mrblaine reacted to sunnysideup_lj's post in the thread Recommended places to source Setrab 53-10748-01 with
Like.
https://patrickmotorsports.com/products/oilset531074801 This place had them on the shelf last week. Not the best price, but readily... -
mrblaine replied to the thread Beadlock wheels and grade 8 bolts.I wouldn't even know where to start to calculate anything in cast aluminum. There are a bunch of assumptions that would have to be...
-
mrblaine replied to the thread Recommended places to source Setrab 53-10748-01.They appear to be temporarily out of stock and expected shortly after the second half of the year starts, if reports are truthful. I get...
-
THANK YOU! Nobody else bothered to tell me I was using the wrong size. I had to use a press tool to get the 19mm on there it was so...
-
mrblaine replied to the thread Beadlock wheels and grade 8 bolts.Serrated flange bolts hold initial tightening. We don't have a problem with them coming loose in normal use. It is when we drag them...
-
mrblaine replied to the thread Track bar stuck cotter pin/castle nut.You have shit sockets or aren't paying attention. The correct size of that nut is 3/4" and a metric 19mm socket is interchangeable. Not...
-
mrblaine replied to the thread Denso radiator marginal in hotter climates?.All that earned me was the title of "forum darling" who only has a statistical sample of one. I think everyone should buy and run a...
-
mrblaine replied to the thread Beadlock wheels and grade 8 bolts.You're smarter than I am.
-
-
Loading…
-
Loading…