macleanflood
I break sh!t From Fall Creek, OR
Latest activity Postings About
-
-
I have 35s with an ax15 and 4.88s. It's pretty good but I would like a lower t case. Ive ridden in an LJ on 35s with a 32rh and 4.88s... -
Just changed cheap fuel injectors with rebuilt bosch and changed vapor canister purge solenoid. Went from 9 miles per gallon to 16...
-
4:56 is good with the 32RH.
-
macleanflood reacted to WestCoastDan's post in the thread Sudden onset of jumping / loping feeling, like tires are egg-shaped with
Like.
So on to 'the hop'... I suspected the LF, so swapped the spare to that corner first. Test drove around the block. No change... -
macleanflood replied to the thread Ring and pinion.Yeah and I have 4.88s and wish I did 5.13s. -Mac
-
The Spicer gears you have are the (SVL) Spicer Value Line. If you already own them, why not run them? Are they new or used? Are you...
-
macleanflood replied to the thread Ring and pinion.Depends on country of origin... -Mac
-
macleanflood reacted to any4xx's post in the thread 99 4.0 and the dreaded EVAP system leak code with Like.
Well Folks…. At the risk of jinxing myself, the problem appears to finally be solved. To recap, I’ve previously tested everything for...
-
macleanflood replied to the thread Noise help between 40-50 mph.I'd guess driveshaft. I'd pull each one and try a test drive. Pull the front...see if you hear the noise. Put it back. Pull the...
-
macleanflood replied to the thread Ring and pinion.Revolution makes the best gears. -Mac
-
macleanflood replied to the thread Speedo 8-9 mph off.You can pull the diff cover... Also there is listed tire size vs actual tire size. -Mac
-
That works if you can weld. I haven't run a bead since about 1987, it would be beyond ugly at this point...
-
The seals typically do fine. What doesn't do fine is the piston bore on either side of center. That's important because the bore wears...
-
macleanflood reacted to Wildman's post in the thread A/C under the hood but no A/C controls with Like.
This is what a 97 w/ A/C HVAC controls looks like. They've gotten very expensive so the PO might have swapped it out when the original...
-
macleanflood replied to the thread Differential covers.I just modified my stock cover and welded on a bung from Grainger. $8 solution. -Mac
-
-
Loading…
-
Loading…