Latest activity Postings Images About
-
-
Shawn at Tom Wood's replied to the thread Hard to Find - Slip Yoke Kit Output seal.On a related note, the socket flange on the drive shaft that fits this transfer case output flange is a bit of a special thing nowadays... -
Shawn at Tom Wood's replied to the thread Hard to Find - Slip Yoke Kit Output seal.We did, but we used slightly different parts than Currie. The seal we used was a 8695S. But the OD on this was slightly larger, 2.690"...
-
Shawn at Tom Wood's replied to the thread SYE on stock TJ?.I just re-read the original post and want to answer that post more concisely and directly. 1) Will the HD 1310 rear driveshaft bolt up...
-
Shawn at Tom Wood's replied to the thread SYE on stock TJ?.First I want to verify that "Stock" in this conversation means no suspension lift, right? That's my assumption but I frequently talk to...
-
Shawn at Tom Wood's reacted to Jerry Bransford's post in the thread A great video on drive shaft angles by Shawn Wood with
Like.
After you watch this video you'll see why the tilt doesn't really matter. -
you're a legend. thanks for the visual aids sir!
-
Shawn at Tom Wood's reacted to freedom_in_4low's post in the thread Transfer case exploded with Like.
that's why you're one of our favorite vendor-members!
-
Shawn at Tom Wood's reacted to machoheadgames's post in the thread Transfer case exploded with Like.
Certainly a fair point that I was not thinking as much about when I was referring to the reliability of the stock front shaft and how...
-
Shawn at Tom Wood's replied to the thread Transfer case exploded.By the way, I cut the non-greaseable socket yoke in half, and took and edited the photos today, just for this post The centering ball...
-
Shawn at Tom Wood's replied to the thread Transfer case exploded.Hey all, I want to weigh in on the greaseable vs non-greaseable socket yoke thing. I've only skimmed the forum conversation so forgive...
-
-
-
Loading…
-
Loading…
-
Loading…
