jjvw
AI Moderator From Colorado, USA
Latest activity Postings Attachments Images About
-
-
Your profile shows 4.0 with auto. With your stock size tires I wouldn't bother with regearing. Just turn the OD off unless you're... -
4.56 on 31's is a bit much, you'd be taching around 3000 rpm in overdrive at 65 mph. They are dead on for 35's. A 4.10/11 or 4.27 gear...
-
I disagree. I am on 35s and the stock 4:10 gearing. The only time I have issues is at highway speeds on long grades. But the 4.0s are so...
-
jjvw replied to the thread Question about re-gearing.Somewhere around here is about right... 42rle/31”/5.13=2877rpm @ 75mph 42rle/31”/5.38=3018rpm @ 75mph
-
jjvw reacted to mrblaine's post in the thread BMB -8 Steering Cooler and Setrab Trans Cooler with
Like.
Zero to do with the radiator. The radiator is well removed from that area and the only thing that can make contact with the bolt head is... -
jjvw replied to the thread If you're into this sort of thing (2002 Sahara).This is a case of if that is what you are going to do, then you did a pretty good job at it.
-
And that’s why I’m going with what Blaine suggested. Me and precision are opposite but his method will give me the best chance at...
-
Done.
-
jjvw replied to the thread Rock Sliders / Rocker Guards Guide.Specialized quality tools like the Rotabroach also provide a level of precision and craftsmanship that can make a meaningful difference...
-
Yup. Quality tooling is expensive. No way around that.
-
jjvw replied to the thread 2025 ROTY big brake install and review.Once you get more familiar and comfortable with the big brakes you should discover a new ability to modulate and control the brakes in...
-
jjvw replied to the thread TJ stock height from the factory?.This thread will be helpful.... Thread 'TJ stock height from the factory?'...
-
jjvw replied to the thread BMB Question.Different wheels will have different clearances. On my initial install of the 16" BBK in a 15" wheel, the stick on balancing weights...
-
-
jjvw replied to the thread MORryde issue.When hanging the gate on the hinges, the latch side needs to be lifted up enough to compensate for the added weight of the tire. This...
-
jjvw replied to the thread Daily Driver, Go Where I Want To Build.Any info I learned about this specific DIY highline was almost ten years ago. It would be done exactly as described and would look very...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
