Recent content by DAgostino480

Okay so here is an update on my pos. I replaced all 4 O2 sensors and still had the issue. They were cheap and my jeep has 150k on the clock so I figured why not. Seeing as the jeep has a third cat that i didn't know about (right after the exhaust hanger where my leak was) I got to thinking...

Would a bad o2 sensor be causing me to not be able to get up pass 30mph?

No check engine light but ran the code reader and got an emission leak large and small code and a p0740 torque converter code pending. Im going on vacation for a couple weeks so I will take a look at things when I get back. Seeing as the jeep runs decent when cold I don't think it will have...

Just fixed my exhaust leak yesterday and now my jeep is slow. The exhaust leak came from the hanger by the transmission and was welded back on. Now the jeep feels slower then normal at first but once it gets hot (around 20 minutes of driving) it won't pass 30 mph. I think it might be the cats...

Im looking for the center radio bezel and center console. Do you have them?

I disconnected it and it doesn't do anything.... as far as the vehicle runs normally without it. I also played with the wires again to see if I could recreate the issue with no luck. The cam shaft sensor is only held in by one bolt and the other is broken off in the synchronizer. I will...

So what you guys are saying is I could be a pioneer for this issue...... greattttttt just my luck :LOL:. Well I am going to start by ordering a new pig tail for the CPS and the oil pressure sensor and go from there. If I touch the wires on my oil pressure sensor then my gauge goes haywire. Here...

So after researching ignition capacitor it seems like only the 02-06 had them? It looks like the exact same part and its to prevent ignition noise from coming through the radio (which I didn't even know was a thing) but has nothing to do with the vehicle randomly dying.

I mean Im not the only one thinking that this shouldn't just have one wire right? It has a protective sleeve so I might cut into that to see if there is another wire tucked into it. I do have an after market head unit in the car. Can anyone help me find a part number or a pigtail for this guy?

So I was driving to work today when my jeep died on me. It did the same thing a week or two ago when I installed a camshaft position sensor and a oil pressure sensor (both mopar). When it dies it will crank but not start, so I pop the hood and wiggle some wires around both sensors and then it...

I looked at zone and saw their kit! I will check them out again. My main reason for trying to go new with everything (besides quality) is that its all beat up. The springs in order to be on my level of cleanliness would need to come off and be re-powdercoated which coming from experience working...

My jeep has some sort of cheap no name lift on it with bilstein shocks. I am wanting to upgrade everything and I have my own hook ups on different high end shocks so the kit just needs to include everything else. I want to stay short arm for now and have knowledge in what shocks to get. Besides...

Fourth Rock Krawler 3.5 X Factor lift. USA Made around $2,000 and seems like good stuff. https://www.4wheelparts.com/p/rock-krawler-3-5-inch-x-factor-plus-short-arm-system-tj35xfpsa/_/R-ROCKK-TJ35XFPSA

I have been in the market to upgrade my lift kit. I have a 3.5/ 4 in lift kit and would like to upgrade due to the on road ride performance. I take my jeep on light offroad trails not doing any rock crawling or crazy stuff. I like to go fast down dirt roads not go slow over rocks (thats just my...

I don't know how to message you but I would like to see some pictures and pick it up f its in good condition