Recent content by JCam

  1. JCam

    2005 Wrangler not starting

    The Jeep went from running fine to not starting. All of the electronic devises work and the head lights are bright. Once the ignition key is turned to start, a single click can be heard from the engine/stater area. I have been told that it is likely the stater solenoid. Some also suggested...
  2. JCam

    42RLE transmission won't shift out of first gear after rear main seal replacement

    My son's 2005 Jeep Rubicon is at a local 4x4 mechanic to have a leak fixed. It was determined that the rear main seal. The seal was replaced and during the test drive, they noticed that the tranny would not swift out of second gear. I personally drove the Jeep to the mechanic and know that it...
  3. JCam

    Jeep Wrangler TJ LED Headlight Upgrade Options

    Chris, Thanks for the quick response and the link. The trigger has been pulled and the elves will be delivering two new headlights on Thursday. The price was a nice surprise and will go along way to help us stay within our intended Christmas budget. Jamie
  4. JCam

    Jeep Wrangler TJ LED Headlight Upgrade Options

    Guys/Gals, My son has a 2005 Rubicon with the factory 7" sealed head lights. He is wanted Santa to bring him some LED Has for Christmas. My goal is to have plug and play and to not spend more than $300.00 if possible? A link to any options that meet my criteria would be greatly appreciated...
  5. JCam

    Code P0562 low voltage / tranny shifting issues

    The Rubi came back from the shop today running great. It took a new ECU to solve the problem. All good for now. Thanks for your support. Jamie
  6. JCam

    Code P0562 low voltage / tranny shifting issues

    Thank you. I guess you have to expect these types of things every now and again on an older vehicle. I just want to make sure it will get my son from A to B safely with a little fun riding in between. Jamie
  7. JCam

    Code P0562 low voltage / tranny shifting issues

    Work has gotten in the way of me pursuing this problem any longer. I found a local mechanic who specializes in Jeeps. The Rubi is on it's way to being whole again. I will post up once the fix is in place. Thanks again for all of your help. Jamie
  8. JCam

    Code P0562 low voltage / tranny shifting issues

    Thanks all. One of the three codes was P0891 "TCM Power Relay Sense Circuit High", I was thinking this might be that relay. If so, change it out when changing the TCM.
  9. JCam

    Code P0562 low voltage / tranny shifting issues

    Thanks for Thanks photo JP98 and clarification Frank. I have located the TCM. I also located a trans relay in the fuse/relay panel just in front of the battery. Is this the tranny relay I have heard others talking about either staying open or closed?
  10. JCam

    Code P0562 low voltage / tranny shifting issues

    Thank you for the responses and encouragement. Any chance you guys have a photo or diagram that shows me where the TCM is located?
  11. JCam

    Code P0562 low voltage / tranny shifting issues

    I was just on the phone with Compton's Automotive, they are an independent Jeep repair center. After hearing the symptoms and learning of the three codes. Ken is confident that the TCM is the issue. I see from Frank's post above that this is a +/- $1,300.00 item. Is this something that is a...
  12. JCam

    Need help with factory console subwoofer wires

    No worries. Good Luck. Jamie
  13. JCam

    Need help with factory console subwoofer wires

    Ray, Before you go through any more trouble trying to find a wiring diagram, you might want to check the condition of the speaker in the console. Our sub was rattling when we got the Jeep and it was because the speaker materials were deteriorated. Based on the price for a replacement speaker...
  14. JCam

    Code P0562 low voltage / tranny shifting issues

    JP98, I am realizing now, the question you should have asked me was if I or the person at the Jeep dealership knew how to read the code scanner correctly. I just know saw the numbers up in the right corner. There are actually three codes and before tonight, I did not know how to receive them...
  15. JCam

    Code P0562 low voltage / tranny shifting issues

    I just took the Rubi up the road and as soon as I pulled out of the driveway, the engine light came on and into the limp mode (second gear) it went. I made a quick stop and then started back home, the engine light was still on, but the tranny started shifting. Then the devil child appeared and...