You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
This issue happens both at low and high speeds but more noticeable at high speeds and I’m sure road crown on the highway has a little...
-
I’m going to have toe set to 1/16 inwards because that’s what the install instructions on the currectlync kit said to do
-
Can you find me the tsb for the axle? Although this is a good possibility, I think it’s more likely that either me or one of the...
-
I agree with you that it’s a band aid. I don’t think it’s worth spending 1000s of dollars for 2 new axles though. It’s worth a try I...
-
https://www.autozone.com/suspension-steering-tire-and-wheel/caster-camber-kit/p/specialty-products-alignment-kit-26012/601958_0_0?rrec=tr...
-
I was thinking adding a .5 camber shim to the front left axle to bring it back into spec.what do you think? I know it say thrust angle...
-
-
I am convinced the axles are bent because both left cambers are slightly out of spec. My ball joints have no play in them. The first...
-
So I should definitely set control arms equal to each other then. It’s safe to assume both left sides of my axles a slightly bent but...
-
My left rear camber is already slightly out of spec so does that mean there’s a possibility that my left rear toe will be out of spec...
-
What’s more important? The distance of the wheels using a tape measure and the control arms are equal lengths or the numbers that the...
-
Jerry, my steering wheel is straight. Earlier in this discussion I explained the issue incorrectly. My car pulls left on the highway and...
-
I’ll have the shop sets the rear arms equal lengths and half them lengthen my front lower right arm because I know it’s half a turn...
-
I did my best because I’m the only one home it’s kinda hard to do. But I got 93 inches from the center of the front wheel to the center...
-
I have had a front end alignment done multiple times and it has not fixed my problem. That’s why I don’t think the drag link is the...
-
Loading…
-
Loading…
-
Loading…
-
Loading…