Latest activity Postings Attachments Images About
-
-
Morks reacted to freedom_in_4low's post in the thread Verifying Rancho shock part numbers with
Like.
If I remember correctly I started with Rockjocks baseline and went from there. -
Morks replied to the thread Verifying Rancho shock part numbers.Definitely a great starting point from where I was at before. For now it works, but would like to do some way harder trails come next...
-
RockJock recommends starting @ 15 3/4” c2c for their lowers with a 4” lift. I started there when I installed their 4” lift, my stops...
-
Morks replied to the thread Verifying Rancho shock part numbers.Yeah just trying to gauge. Thought I had it alright until full bump and it touched the track bar. It was hot and I needed it for work...
-
Morks reacted to freedom_in_4low's post in the thread Verifying Rancho shock part numbers with Like.
I'd have to put a tape to it but it wouldn't necessarily be a true setting for yours. I start (with the frame on stands and springs out)...
-
Morks replied to the thread Verifying Rancho shock part numbers.What lengths are your lower control arms set at both front and rear? Trying to dial my suspension. I know my fronts are definitely too...
-
Morks reacted to freedom_in_4low's post in the thread Verifying Rancho shock part numbers with Like.
I use the 55255 and 55256 with 4" Currie springs in the front and some unidentified in the rear that probably sit a bit lower than...
-
Morks replied to the thread Verifying Rancho shock part numbers.Travel wise in the front I have 4.75" up and 3.75" down (passenger) and 6.35" down (driver). I was in a rush doing that side so I am not...
-
Morks replied to the thread Verifying Rancho shock part numbers.Those are the part numbers I used for mine with a 4" and 1.25" body and can use all the uptravel. The 5255's were on sale cheap on rock...
-
Morks reacted to PNW_LJ's post in the thread Washington Currie Rear Extended Sway Bar Links with Like.
Selling a set of brand new Currie rear sway bar links. These were mocked up, but never used because the length caused the sway bar to...
-
Morks replied to the thread Engine replacement issue.Nope, try diagnosing what the issue is first, but you can change it pretty simply. Plenty of youtube videos.
-
I’m running into what appears to be the same issue. Can you change the cps with the engine installed? You don’t have to take it all back...
-
Morks replied to the thread STICKY September 2023 ROTM (Ride of the Month) Contest.
-
-
Works fine - old school item mounts in upper tray - powered ( charged ) by tapping into a switched 12 v ( power outlet) $150. Buyer...
-
I have many good used. How many would you like? I don't keep any with over 75,000 on them.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
