nondem
TJ Enthusiast 53 From Tallahassee, Fl. USA
Latest activity Postings Images About
-
-
nondem reacted to AndyG's post in the thread Will a transfer case cable shifter fix my issue? with
Like.
All good posts. A cable shifter is a true upgrade- Usually you can shift with 2 fingers, the shift points are definite, all the vague... -
nondem replied to the thread Anti-seize on motor mounts.Thanks for the thoughts...These jeeps have a reputation for rust and seized bolts, earned or not so I try to use it everywhere is isn't...
-
Who would use antiseize on motor mount bolts? I would assume it's a no-no on the torque-prevailing bolts but what about the other two on...
-
nondem reacted to Jerry Bransford's post in the thread Why does my steering suck with Rough Country 4 inch lift? with Like.
Rarely, and then only if the driver's side track bar mount was dropped which is never a good idea.
-
nondem replied to the thread Why does my steering suck with Rough Country 4 inch lift?.I put a 4" lift on mine(w/adjustable track bar) and then did the tape-measure toe-in adjustment. All factory steering components and it...
-
nondem reacted to primetime4's post in the thread Why does my steering suck with Rough Country 4 inch lift? with Like.
I came across this today while researching a local 4x4 shop and thought it was pretty interesting...
-
nondem reacted to gogetter's post in the thread Close to being an almost finished build (almost) with Like.
Terrific job! Now comes the last (and longest) part of the build process: listening to your Jeep and letting it tell you what it needs...
-
Only 3 left now :p
-
nondem replied to the thread Transfer case linkage let me down yesterday.Just an update...there are only 4 in stock on Amazon now...I just hope I'm able to intercept the shipping guy. :)
-
nondem replied to the thread Transfer case linkage let me down yesterday.You have a point...I did have someone put it in drive and park and hit the throttle while I watched the engine and it didn't flop around...
-
nondem reacted to SvtLdr's post in the thread Transfer case linkage let me down yesterday with Like.
Have you checked your motor mounts and transmission mount? Is it possible the drivetrain is moving excessively causing the shifting issue?
-
So since I got this TJ, 2H worked fine but it would sometimes pop out of 4L if I didn't actually hold the handle back. It worked fine...
-
I run 24-26 psi street pressure with 315/75R16-E (metric 35) tires, depending on load.
-
nondem replied to the thread Correct Tire Pressure for On-Road.Thanks...that's actually about where I ran the 31's that came on this Jeep. I was looking to go as low as possible w/risking heat...
-
I’ve learned here these small differences actually do make it ride better. But, when I see posts that specific….I always think of...
-
-
Loading…
-
Loading…
-
Loading…