Bartact seat cover pics

BonesXX

BonesXX

TJ Enthusiast
Supporting Member
Joined
Sep 21, 2020
Messages
422
Location
Atlanta, GA
Anybody have pics after a couple of years of use? I have had Caltrend for a couple years and the drivers seat still fits well but is wrinkled to the point of having a “bubble” of wrinkles in the middle.

The Caltrends are Ultra suede which I chose to avoid the seat getting hot while sitting in the sun with the top off. i guess that could contribute to the wrinkles

Thanks for any replies.
 
Coyote/Coyote…was a bold choice with kids still in car seats and admittedly I could be more careful with what I put on them but overall I’m still happy and they clean up nicely either in the wash or with the upholstery cleaner.

IMG_1166.jpeg


IMG_1033.jpeg


IMG_0988.jpeg


IMG_0986.jpeg


IMG_0980.jpeg


IMG_0981.jpeg
 
  • Like
Reactions: RangerTJ, BonesXX and John Cooper
Honestly I’ve had a hard time shelling out the money even though I know how good they work- It’s just a lot of money for seat covers-

But every time I get in the vehicle I enjoy the covers and the ease to clean and maintain them is unsurpassed-

And they are the right texture to be able to move in the vehicle like you need to to get in a jeep that’s lifted to slide in but you’re not sliding around once you’re seated-

I had these logoed in my ‘04

image.jpg
 
  • Like
Reactions: zebra12 and BonesXX
Thanks for the pics. Anybody using the Baselines? I don’t need the MOLLE. Just curious if they hold their shape as well without the stitching in the seat.
 
Last edited:
lBasket said:
Do any of you guys use the molle around the base
Click to expand...

On the back of the fronts I’ve got water bottle, ponchos, etc. they come with two Molle pouches and they make for nice zippered storage for the rear passengers, or quick access items. Also used to the side straps to hang a light and portable radio

The rear seat comes with a long wide one I use as a first aid kit.

Nice to have but not a deciding factor.
 
  • Like
Reactions: John Cooper and lBasket
I've had mine for about a year in my DD. It was a hard nut to swallow but so far the cost seems absolutely worth it. I have black/black and they are still dead perfect. They haven't bunched, slid, stained or faded. If I were to do it again, I would still get black/black but would have special ordered without the MOLLE grid.

If you have a rear seat and have ever folded it forward with the Bartacts on, you know that anything mounted to the MOLLE will create interference issues. Candidly, the thickness of the covers makes folding the rear bench forward a challenge.. not horrible but you know you have some thick covers on.

lBasket said:
Do any of you guys use the molle around the base
Click to expand...
Nothing mounted permanently. I have a few of these MOLLE shock cord mounting pads around the base that I swap the flash light, pencil pressure gauge etc into, but with doors off anything not bolted in will take a walk so loading the MOLLE stuff up is part of my pre-offroad setup routine. I use a few of these too.
 
Last edited:
  • Like
Reactions: lBasket
lBasket said:
Do any of you guys use the molle around the base
Click to expand...

My TJ doesn't have a center console and I attached one of the small pouches that come with the Bartact front seat covers to the base of the driver's seat on the inboard side. Works great for the stuff that would normally go in the center console.
 
  • Like
Reactions: MikekiM and lBasket
DaveC said:
My TJ doesn't have a center console and I attached one of the small pouches that come with the Bartact front seat covers to the base of the driver's seat on the inboard side. Works great for the stuff that would normally go in the center console.
Click to expand...

The stock console sucks anyways it's just a big pit of no return
 
  • Haha
Reactions: DaveC
MikekiM said:
I thought the same. Bought one of those 3D printed drop-in inserts. Now I have the bottom for stuff I don't need often and the two top sections for more frequently needed items... Ketchup packets and coffee cup sticks

View attachment 430775
Click to expand...

Priorities!! Did you have to get it on like Etsy? That looks nice. I used to have one of these on the side:

1686167853615.png

I really liked it for my wallet and other Colorado specific recreational objects, but the netting came off after a month or two
 
MikekiM said:
I thought the same. Bought one of those 3D printed drop-in inserts. Now I have the bottom for stuff I don't need often and the two top sections for more frequently needed items... Ketchup packets and coffee cup sticks

View attachment 430775
Click to expand...

That red tray would look better in my red Jeep. It would also hide my 3 beers and ice pack. ;)
 
  • Haha
  • Like
Reactions: Blondie70 and lBasket
Top Bottom
Back