Welp testing out some porting never done it! Doing it on my painted manifold should ported then painted but porting was a last minute decision to be honest 
One thing I learned 5 seconds in,let the burr the work like sand paper and do line for line as strokes so the burr won't jump around and cause dings in your piece
Here's some blurry photos my phone ain't the best I'm 19 but don't care for good phones which leads to the cam
, life bills and jeep parts are more important !
Anywho Here's a before Some before shots
And after. So after 10 minutes the port feels awesome no longer as much as a big Ole bump/bulge where the injector boss it at
Again this is my 1st time porting so any tips are appreciated !!!
One thing I learned 5 seconds in,let the burr the work like sand paper and do line for line as strokes so the burr won't jump around and cause dings in your piece
Here's some blurry photos my phone ain't the best I'm 19 but don't care for good phones which leads to the cam
, life bills and jeep parts are more important !Anywho Here's a before Some before shots
And after. So after 10 minutes the port feels awesome no longer as much as a big Ole bump/bulge where the injector boss it at
Again this is my 1st time porting so any tips are appreciated !!!
Aye man I was getting hungry here at night,just kidding its a ear plug I put them in all the injector holes from when I was painting so the paint wouldn't get in there,tin foil or silicone plugs work too!
