Hoping for some help with brake issue. I have recently installed a full brake kit from Blackmagic (calipers, pads, drums shoes), installation went well and then I did a full bleed on the system, looks like no air bubbles left anywhere and the fluid is completely full in the master. I used a motive power bleeder (if that makes a difference).
When testing out the brake pedal, it is semi firm when the key is in the accessory position but still goes all the way to the floor.
When running, the pedal goes straight to the floor with almost no resistance.
Things to note:
1. When depressing pedal fast, there is a loud hissing sound coming from brake pedal
2. Perhaps more important, when fixing another part, I slightly bent the secondary brake tube (hard line from proportioning valve). Doesn't look compromised but I'm not sure if somehow there is and air leak
Does anyone have any ideas of what else I could do to test out certain components (master cylinder, brake tube etc) before just throwing money at new parts
Thanks
When testing out the brake pedal, it is semi firm when the key is in the accessory position but still goes all the way to the floor.
When running, the pedal goes straight to the floor with almost no resistance.
Things to note:
1. When depressing pedal fast, there is a loud hissing sound coming from brake pedal
2. Perhaps more important, when fixing another part, I slightly bent the secondary brake tube (hard line from proportioning valve). Doesn't look compromised but I'm not sure if somehow there is and air leak
Does anyone have any ideas of what else I could do to test out certain components (master cylinder, brake tube etc) before just throwing money at new parts
Thanks