02' TJ - Capable daily driver

kiwi · Sep 17, 2023

Finally decided to tackle the RMS Job, paired with a new oil pan and gasket

Drove it for a couple hundred miles without any leaks so I put on my Savvy engine skid

Just need a new gas tank skid and my under armor will be complete

PNW_LJ · Sep 17, 2023

kiwi said:
Finally decided to tackle the RMS Job, paired with a new oil pan and gasket
View attachment 458388

View attachment 458389

Drove it for a couple hundred miles without any leaks so I put on my Savvy engine skid
View attachment 458390
Just need a new gas tank skid and my under armor will be complete

Not enough scratches

kiwi · Sep 17, 2023

Some front end upgrades including blaines new winch line and thimble

PNW_LJ said:
You got time to install a lift, but not fix that steering box skid? Come on man, my OCD is killing me.

And a properly mounted steering skid just for @PNW_LJ

Wildman · Sep 17, 2023

kiwi said:
Some front end upgrades including blaines new winch line and thimble
View attachment 458440

And a properly mounted steering skid just for @PNW_LJ
View attachment 458442

It's really looking good.

deadbeat son · Sep 17, 2023

kiwi said:
Some front end upgrades including blaines new winch line and thimble
View attachment 458440

And a properly mounted steering skid just for @PNW_LJ
View attachment 458442

Do you not have a front anti-sway bar?

kiwi · Sep 17, 2023

deadbeat son said:
Do you not have a front anti-sway bar?

Not at the moment. I had JKS links with my 2” lift, but instead of buying new links for the 4” i’m just gonna pick up a swayloc soon

deadbeat son · Sep 17, 2023

kiwi said:
Not at the moment. I had JKS links with my 2” lift, but instead of buying new links for the 4” i’m just gonna pick up a swayloc soon

Good call, I love my swayloc. I don't think I'd be comfortable driving without a bar though, seems like it would feel pretty floppy.

kiwi · Sep 17, 2023

deadbeat son said:
Good call, I love my swayloc. I don't think I'd be comfortable driving without a bar though, seems like it would feel pretty floppy.

It does have significantly more body roll, but once you get used to it it's not so bad. Swayloc will be the next mod for sure

kiwi · Nov 24, 2023

Dropped the TJ off for 5.13’s and ARB’s. HP30 on the back which will be getting some mods after!

kiwi · Jan 28, 2024

FB Marketplace find of the year so far, all thanks to @PNW_LJ for sending me the listing almost as soon as it was posted!

Some Savvy sliders and corner armor, got everything for 300$ with no issues except a scrape/bend on one of the corners that I think I can straighten out. (Can sort of see it in the photo)

kiwi · Jan 28, 2024

Some more updates, did the 500 mile break in period for the rear end and swapped over the Barnett cover at the same time

kiwi · Jan 28, 2024

Slowly making progress on the HP30, was away for the month of december visiting family back in NZ

But got to work after coming back, so far have got it stripped down

And got the CA brackets removed and ready for iron rock mounts, hoping to get the raised swaybar brackets tacked this week and then get everything welded in

PNW_LJ · Jan 28, 2024

Congrats dude! I was so happy you got it, basically stole that armor for 300 (and who knows when savvy will come back in stock).

Can't wait till you get that armor and HP30 installed, so that there's no more excuses for skipping Reiter!

MeanGreen86 · Jan 29, 2024

How hard up for cash do you need to be to sell that armor for 300!
Damn what a grab.

kiwi · Jan 29, 2024

MeanGreen86 said:
How hard up for cash do you need to be to sell that armor for 300!
Damn what a grab.

Not sure the guy knew what he had, apparently his wife rolled his TJ in the snow storm a couple weeks ago

The listing was for selling the TJ whole, but he quickly agreed to selling me just the armor for 400, and once I got there and saw the bend in the corner armor he was happy to do 300

Mike_H · Jan 29, 2024

kiwi said:
Not sure the guy knew what he had, apparently his wife rolled his TJ in the snow storm a couple weeks ago
View attachment 495419
The listing was for selling the TJ whole, but he quickly agreed to selling me just the armor for 400, and once I got there and saw the bend in the corner armor he was happy to do 300

Dang man...I've been looking for GenRight or Savvy corner armor for about a year...and haven't found it. Nice Grab!

kiwi · Feb 4, 2024

A bit more progress on the HP30.

Knuckles/ball joints removed and everything cleaned up with the wire wheel

Mocking up the sway bar bracket

Both sides are tacked in, ready to be welded in along with the CA mounts

Now to decide which shafts to buy for it..

kiwi · Feb 20, 2024

Spent the weekend getting halfway through the savvy armor install..

Took a while but eventually got a good door sill gap while keeping it tight everywhere else

Cleaned up the armor with an orbital sander followed by scotchbrite and some cleaner

Luckily everything seemed to line back up!

Mounted the fender flares just with the current holes in the armor before I decide to drill through the armor itself

kiwi · Feb 25, 2024

More HP 30 progress..
Got everything welded on and some paint, hoping to get ball joints - knuckles - shafts in this week

kiwi · Mar 17, 2024

Finished up the rest of the armor install this sunny weekend..
I expected this side to be a bit more time consuming given that my rocker panel on that side was out of shape and the corner armor had this in it: