JKS ACOS Pro: Adjustable coil over spacers with adjustable nitrogen bumpstops?

Here's a shot with the ACOS installed.

1712361591392.png
 
Those were very common on the Off Road General Store 5.5" XJ lift in the day. Mark Hinkley - the designer and proprietor of ORGS - used them to level out the leaf springs since the Rancho coils were only 4" lift. They worked well - I ran them on my XJ until I wised up and got a TJ. Mark worked for JKS also an may have designed those things for them.
 
  • Like
Reactions: Mike_H and Wildman
Is this the ACOS thread where their unavoidable minimum lift height was creating ride height issues and coil bind?
 
Camdenst said:
I was looking into alternatives to a puck spacer to help level out the front end.
Click to expand...

I understand that. ACOS has an inherent minimum amount of spacer lift that you cannot have less than. That minimum amount of spacer lift is more than one might expect, and potentially more than you are wanting.
 
I’m at an inch or so between the isolator and the OME spacer. I’ll know more when I pull everything apart, but that minimum inch plus from ACOS would be all I need.

Rough country makes a 1in 3/4 puck which would probably work and save some cash.

Thanks again for all the input.
 
Last edited:
Camdenst said:
I’m at an inch or so between the isolator and the OME spacer. I’ll know more when I pull everything apart, but that minimum inch plus from ACOS would be all I need.

Rough country makes a 1in 3/4 puck which would probably work and save some cash.

Thanks again for all the input.
Click to expand...

Pretty sure the minimum from ACOS is 2", if read the product description.
 
Top Bottom
Back