Search results

Just came back from an off road trip and my rev limiter is kicking in 3800-4200 rpm then gives power all the way to 5k. No codes. Speedo and airbag light are freaking out too. Any ideas?

Went off roading in a heavy brush area today and now my speedo is flipping out. Also getting an intermittent Airbag light that may or may not be related. Speedo wire looks good coming out of the transfer case. Any ideas. Video attached: notice the airbag light coming on at the end as well...

All controls work, but defrost leaks slightly when it should be shut off completely. This eventually causes condensation to build up on the outside window in the summer humid heat. Wipers clear it for a minute but once the window is that cold it's back quickly obscuring my vision. All vacuum...

2000 Sahara. Are the cheap Amazon controls worth it? Do the lights look correct at night? Anyone know where I can get OEM controls. Blower keeps turning off intermittently. Gonna do controls first, if that dosent do it. Then resistor. Then Blower

AC blower shut off today in the middle of my drive home. Recycling the engine and it comes back on 80% of the time. Turn it up to 3 or 4 and it kicks off again? Do I need a new blower and if so can I upgrade it to something that blows stronger?

Before I buy the Throttle Hand Control on Amazon. I remember reading people saying it sucked and they would use nicer quality Bike gear selectors. My question is, is there a better option that I can buy with everything I need. And if I piece one together, what selector are you guys using. I...

How do these hold up over time. I am replacing my leds after about a year of doing an led swap where the leds go out or flicker after a while and of course don't dim either. Do these dim?

Wish I had a better pic. I'll get one when I get home. If you look close. There is a 3rd seat belt that's blue. I'm not talking about the 2 passenger seat belts. There is a 3rd very long blue lap belt. That goes all the way across the rear cab.

There is a long 2 point blue seat belt in the rear of my jeep. I dont know if its stock or the PO put it in. What is it for.

When putting my 32 tooth gear back in the transfercase. I line it up with the 32-45?? part of the housing and the speedo dosent work. If I put it on the 31-28?? part of the housing. It works. Will it hurt anything if i leave it on 31-28 even though it's a 32 tooth?

Is this the correct speedo gear "shaft size" for a 2000 Sahara NV3350? The reason I ask is they have a short or long shaft. I have 33 bfgs which are actually 32.5s so I'm gonna do a 32 tooth.

I decided on the Rancho 5000x and have had them about a year now. They've been great. No experience with the other options mentioned. I do want to say wobble is more than likely worn Tie rod ends, bad caster because of lift and stock control arms, worn trac bar ends, or worn d-link end. Also I...

Took the wheels off and opened em up. Cleaned them with dish soap and the hose. They work like new. Thanks for the dish soap and water suggestion. E

Replacing my drum brakes because of an unfortunate over usage of penetrating oil around axle. Basically both drums got doused and the oil got into them. Now overnight they barely hold the jeep on level ground. Any ideas before I buy new pads and drums? I've hit em hard with brake cleaner and ran...

Any suggestions on a blower motor upgrade for my 2000 Sahara? It doesn't blow dead still but still not as strong as modern vehicles. Haven't found anything for TJs in my searching.

Yes, I was sceptical because of folks on here saying its 3d printed and won't hold up but when faced with the task of running down and modifying a bunch of different parts from stores I don't have in my town. I gave them a shot since they were made to the exact spec of my seats and they are such...

Fyi I ordered the kit parts and the guy was super nice. I installed them a few months ago and with heavy use over the winter, I have seen no wear on the new bushings and the seats are rock solid.

Looking for the best band of bed liner for exterior plastic parts. Key features are the obvious. No or little sun fade, cleans from mud easily, tough and long lasting.

Can you send a link of the exact one you ordered. I'm assuming it's the black color.

Just dyed my light grey leather wrap I bought off amazon 4mths ago to match the oem color. Came out well! Very easy to do the dye was 7 bucks at hobbies lobby and the sealer was 7 also. Looks oem again