Search results

All the shift bezels are interchangeable

The weight of his balls in the driver seat helped keep the front end down when approaching the waterfall.

Those rock lights are bright!

Sorry mate didn’t realize you designed the very first soft shackle mount that bolts to the bumper mounting bolts of a tj…

That looks like a classic JB pic.

Atleast @Fluxor’s is radiused properly for the soft shackle.

Well that’s good to know.

Testing voltage on an open circuit is useless. You could have 1 strand of wire connected and still read B+. You could also have thousands of ohms of resistance and still measure B+. Measuring voltage with a dvom is only a useful test on a live circuit. By using a test light you are loading the...

I highly doubt a mate to connector ever existed outside of the pcb mounted ones that are on the pcm itself. What are you after the mating connector for?

How are you testing for power. This would be a good time to use an incandescent test light, not a volt meter.

Do you have any inners?

The main and rod bearings are not “chewed to shit”. Those cam bushings are “chewed to shit”.

Those bearings look fine, the wear does not explain a loss of oil pressure unless the oil clearance was not in spec.

What side of the relay is your pressure switch on?

Have fun trusting the Chinese.

Over 3 amps but that doesn’t account for the spike of current when it engages. It’s proven difficult to get a quality pressure switch anymore, I wouldn’t want to run 3+ amps through one. Run your switch pro power wire to both pins 30 and 86 of the relay. Run pin 87 to the york clutch. Run...

Make sure you run your York’s pressure switch off a relay to not pull a few amps through the pressure switch.

Needs a currie track bar to do very difficult trails.

@Jerry Bransford get this guy sorted out.

Those battery cables look sad :(