Search results

My OEM radio screen seems to be acting up. It's either got red lines running across the screen or it's really dim that you can't read it during the day or night. Otherwise works great, any remedies?

Has anyone tried the Currie Johnny Joint on a Metalcloak trackbar? Any issues or things to look out for? https://www.currieenterprises.com/CE-9112N75-14

I was rotating my tires and looking for an occasional clunk I get at slow speed turns. I saw the angle of my Drag Link rod end connected to my Pitman arm. Is this angle normal?

Ordered a new set of skid plate bolts and nutserts from Black Magic Brakes. Havent gotten around to replacing them but wanted to see if there were any tips or tricks on removing the original OEM nutserts? Thought I saw someone mentioned using a step drill bit...

I have about 600 miles on my Mickey Thompson ATZ 33x12.5 R15 tires. Yesterday while getting gas, I noticed the tire wear pattern. Based on the wear, it would seem I have over inflated tires but I run 26 psi cold on all four tires. Front tires toe in to 1/16. Wanted to get some options from...

Trying to install my Savvy Engine Skid plate on my TJ. I am having issues centering and aligning the Engine skid to properly mount to my stock transfer case skid. I've installed the motor mounts and loosely mounted the struts and skid. I cant seem to get the skid plate centered and aligned...

Any opinions on Rear Bumper Reinforcement Brackets? I know it doesnt hurt to have them but are they needed? I dont intend to tow but will use the bumper as recovery points. I currently have the Dirtworx rear bumper mounted with 8 Grade 8 bolts mounted. Thanks

Can anyone confirm the size of the 3 mounting bolts for the steering gear box? I just removed a front tow hitch and it had bolts to fit with the hitch. From my research, the part number is 6036502AA but looking for size to see if I can pick some up. Doesnt look like many places sell the OEM...

Hey Guys, I have an interesting problem. I'm installing my front Dirtworx bumper with a built in winch plate and have a Superwinch EXP 10si to install. I was prepping to drill the holes for the winch, standard 10 x 4.5 inch square pattern. With the rear of the winch against the front sway...

Does anyone have feedback or comments on the Dynatrac Prorock Diff Cover for the Dana 44? Any clearance issues on a TJ? There is one new for sale in my area but want to make sure there are no clearance issues. I read Barnett covers are nice but not sure they are still in business. Sent from my...

Quick question, I just finished doing a transmission flush on my 05 Rubicon and noticed some things. My steps were as follows: Took line from drivers side after B&M transmission cooler and connected a clear hose to it. Turned the car on and pumped out about 3 quarts pretty quick and then shut...

I was able to pick up an 05 TJ Rubicon, auto tranny with 78k miles. Garage kept with A/C, no rust amazing shape. Been building the last 2 months. Here is a short list of things I've installed or waiting to install: I'll update thread as I keep going. 3.5 inch Metalcloak Lift with Rocksport...

Hey Guys, In the middle of installing my B&M 70264 transmission cooler. I have the cooler mounted up in front of the radiator. I know the line back to the tranny is on the drivers side. I went to work on the drivers side output line and got confused with the current connections I have...

Just lifted the Rubicon and my front drive shaft was hitting the front transmission pan skid plate so I removed it. Looking for replacement and alternatives that will protect the automatic transmission pan. I dont mind replacing the main skid plate as well. I dont plan on doing a tummy tuck...

Quick question, just installed my 3.5 metalcloak lift and tom woods 1310 shaft. The driveline angle is at 18 degrees and pinion at 16 degrees. Drove about 40 miles today and notice a little rhythmic vibration at 45mph. It goes away at 50 mph. Will 1 degrees from "optimal" (pinion -1 degree...

Temporarily mounted the 6" Bushwacker Flat Fenders on my 3.5 inch Metalcloak with 33's. Not sure how I feel about the gap between the tires and fenders. Thoughts?

So, I just installed my Metalcloak 3.5 inch lift and have the rear pinon angle dialed in. I've read that you shouldnt have to mess with the front but I measured the angles and I have 11 degrees on the drive shaft and 4 degrees in the front. From what I've read, they should be the same angles for...