Search results

I enjoy spirited driving from time to time and it so happens both times I've done this my OPDA will go out of sync/timing. I made a thread a few weeks ago asking for help installing my OPDA I got it installed and working for those few weeks and everything ran fine, today this morning while on my...

Hello it's been a while but i'm back after attempting to replace my own OPDA. I got a P0016 code and Jeep went into limp mode while driving. I got under the Jeep and rotated the crank by pushing up on my ratchet so if you're looking straight at the Jeep from the front I turned Clockwise. Once I...

Hello I'm having trouble with my TJ it was sitting for a few months waiting for gears and prior to that I had no play and could drive 80 down the freeway with no hands on the steering wheel and maintain straight. A few weeks ago I was driving through some mountain areas and during the wide...

Anyone have surface rust showing from droplets that come from the A/C condenser which sits directly above a section of frame? I can post pictures later, Should I just throw some paint on it and call it a day?

Bought some factory half doors for 100 bucks and I went to put them but when I tried to close it the door would not latch properly. Noticed it’s off by about half an inch possibly. Was I duped? Can I just drill new holes?? Or am I missing something

Basically the title There’s three latches and I’m unsure as to which one is the tumble.

I haven't found much on how to install a 4 or 5 point racing harness into a wrangler. I'm getting my new PRP seats this weekend and I want to get a harness, I don't use my Jeep for daily driving so it won't be a hassle for me in regular day to day use. I already ordered a rockhard harness bar...

Hey all, I have a weird issue with my TJ. It keeps boiling the radiator fluid and anytime I lift the hood I see the splatter of fluid from it shooting out the overflow tank. I've got a new cooling system installed and have a new 18lbs radiator cap as well. I made sure there was no air in the...

Hey everyone, hoping someone can provide assistance on how to remove these fuel lines I squeeze the tabs on the side but the insides don’t move to release the line. I tried using the quick disconnect tools but they don’t work either or too big too fit.

Alright guys I’m an idiot. Now that it’s over with, my tuffy console never locked it was always stuck on the open and the key wouldn’t turn. Today I had enough and took out the locking cylinder I’m thinking it was installed incorrectly and that’s why it wasn’t working. While it was out I closed...

I think my door is bent, in the last picture it looks like the door sticks out a bit. In the other pictures I show how the seals don't seem to actually seal but just sit on top of the door surround. I think at least the outer ring of the seal should go past the door surround to make a seal...

Basically the title - i've finally saved up enough to buy some PRP enduro elites. I do want heated seats but on PRP website it's $165 to add the heated seats option per chair bringing the total up at least $320 more than without. Would it be wise to just order the seats and add a dorman heated...

Hello all, I recently put some round maxbilt led lights on my Jeep. I cut the end off of the old tail lights with the connector and used that to hook my lights up. They worked fine no problems but I need license plate lights. I bought the screws with LEDs on the ends and so I have 2 sets of...

looking for genright savvy motobilt along the line of those.

I got my new suspension installed and I replaced the steering with a Currectlync at the same time also did the ball joints at the same time. Ever since then though my steering wheel hasn't been straight. I got everything retorqued and took it to get an alignment and it was straight but soon...

I was just wondering who cleans their jeeps making them look nice and shiny? I've had my Jeep for almost 9 months and I've washed it twice. The first week I bought it and a few days ago, Got me thinking because I did a quick spray down and wipe but it my paint looked ugly from antifreeze spill...

I have a 2005 Wrangler SE with the 4.0 I have 2 PCM one OEM and one @Wranglerfix... The OEM has 4 O2 sensor codes that won't go away and this is a problem with the PCM... but I don't have P0157.... when I plug in the wranglerfix pcm I only get code P0157. I don't know why i'm getting the code I...

Hello all who are interested. I will be going over my build here and what it entailed. I bought a 2005 Wrangler SE with a 4.0 and a 42RLE. This Jeep was bought from a dealer auction through a friend I thought I got a great deal but it turned out I did not get such a great deal and therefore...

Hello all, I'm trying to track down a squeak but I can't find it. I thought it was a suspension component at first because it would squeak almost constantly over any kind of street or terrain. I have now replaced all springs/shocks/trackbars front and rear/steering currectlync/ u joints in...

I enjoy going to Baja California after all I live in Los Angeles so it's a few hours on the road. Well I have never gone while I have owned my TJ and have always had the thought of going but I worry about it getting stolen. I see people on Youtube doing all sorts of trips out there and I wish I...