Search results

I replaced my enormously heavy Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier with the Crawltek Pyro Mid-Width Rear Bumper. First impression were good. The mounting instructions say you can use 4 or 8 bolts to mount the bumper, and the PO had already drilled out the needed holes in...

Amazon shipped my $90 Mopar oil pan gasket rolled and stuffed into a small box. Fk you Amazon!

This is my second attempt at fixing a leak around the rear oil pan gasket hump. I previously replaced the gasket and RMS, mistakes were made putting the pan on but I put it all back together and ran it for a few months until the leaking got on my nerves enough to do something about it. That...

What is the consensis on these types of stubby rear bumpers? is there enough structure behind the d-ring shackles to trust them in a real recovery situation? https://affordableoffroad.com/shop/rear-flush-mount-bumper-jeep-cj-54-86/...

What is the preferred 4.0 oil pan gasket? I just put on a Felpro gasket and when I was test fitting it, there was excess length around the hump of the RMS, which is now where it is leaking slowly.

Investigating my oil pan leaks and found the gasket in the below condition. I had previously paid a shop in Nebraska to replace the pan, gasket and RMS. What the ACTUAL FU*K!!!

I spoke with JB Conversions today about the out of stock SS SYE for the 231J transfer case. They said the parts are being finished and should have them in a week or so. They will fulfill back orders first then they can take new orders and will have plenty of stock available.

I just replaced my mopar water pump 68382489AA with a gates replacement. The pump lasted 13 months and 14k miles. Is that normal?

I feel like this may elicit the angry TJ gods, but... Can I install a SYE and use a new and longer standard non-cv rear drive shaft? I'm sure the question is then, why not get a double cardan DS? Because I don't want the extra costs of the supporting suspension mods to tilt the pinion angle...

I’ve been working on a second round of flushing my cooling system for a few weeks now. I started with Thermocure, ran it for 3 days and then flushed it out and ran Prestone flush for the days. For the entire time I’ve owned this Jeep (13 months) whatever coolant or water I put in always...

I was going to replace my steering gearbox for excessive play and a very large dead center and ran into an issue with the hose connections. The OEM box has double flare fittings with an o-ring, the remanufactured Byautoparts box has single flare fittings with a brass insert. I crossed...