Search results

I have a 1997 TJ 2.5 l. It has been sitting for about 2 months and was running fine prior. I went to start it the other day and it ran fine for about 5-10 minutes and then started sputtering and missing and then shut off. Tried restarting it it would just sputter Miss and shut off again. If I...

So I have a auto trans leak on my 97 TJ. I bought the dye to do a leak test but it does not say how much dye to use. It is a 1oz bottle. Should I dump the whole bottle in or can I do 2 trans with 1 bottle? There is no instructions on the bottle. I would like to do my TJ and a GM TH350.

SO MY tj has been sitting and went to start it and nothing. Jumped it and ran it for awhile and all good. A week later dead. I use to sit for months and would start right up. Only thing that has changed was I put the factory rear wiper setup in. Will that have a draw even when Jeep is off?

97 TJ 2.5L. I put a new T-stat in last fall and necer got really any heat and the guage was always about 170. This week I pulled it apart and found the stat stuck open. I did a cleaning/flush, all new hoses, new Stant Superstat 195 amd mew T-stat housing. Still have the same issue. With the...

Does anyone know where to get just the rubber that goes between the outside door mirror and the door? I am missing 1. I found them with the mounts but just need the rubber.

Found what I was thinking of BOESHIELD–T-9 Spray Lube But you still got me. LOL

Ok you got me. Years ago there was a spray for marine/boats that was call T10 I think.

Never heard of it, where do you get it? I think just WD-40 would work but not sure how I might be able to get to that door to lube up.

Well got it all done today and it was much easier then I thought. I found that the door is hard to turn, is there a way to lube the door?

Ok, thanks, I will look at the videos. I am going to order both levers to make sure I have the correct one.

Heater core is not leaking and it id not worth it to me to pull the dash apart just to get the dash vents to work. This is no fancy TJ just one for plowing. If it has heat it is good.How do the actuators get removed? The plastic arm is still on the metal rod with the retainor clip. The broken...

My 97 TJ with just heat has a broken blend door actuator arm. I have been looking up threads on how to fix it. My question is 1- how do I get the metal retaining clip off the arm. 2- how doe the actuator come ot for more room. 3- is the other arm going to be in my way' The broken arm is on the...

Does anyone place sell a complete cowl screw kit? One that includes the u-clips and push in nylon nuts? Mine are all miss matched and damaged.

I eould like to put all new on seeing is out. Do not to find out later that it leaks.

Sorry guys 1 more question. What gasket or seals do I need to put on the frame when changing it. Is there a conplete kit? I see I need a header seal but what else?I have a hard top on it. The glas will be installed by safelite.

I use Never seez anti seize compound, I like it and guessing it is the same.

The TJ they came out of had about 130K on it. I cut the trac bars off but all brake parts are there. If it was me I woul put all new in them just so I would not have to worry. I put a set with 4.10 in my TJ. These are from a donor I had. Just would like to sell them and for a fair price, not...

I need new hardware to mount my windshield frame, mirror's and stock fender flares back on the TJ. I see both OE steel bolt and stainless steel. What should I use. I know the stainless used on my boat is not as strong as steell screws/bolta.

Have a set of front DANA 30 and rear DANA 35 3.73 axles from a 98 TJ. was wondering how much to sell them for, a fair price? I am sure they would need new u-joints and service them. Thanks

Make a reasonable offer and take them.