Search results

OK guys sorry to take so long to reply. Got the jeep back a few days ago with my problem fixed. Apparently easy enough all that needed to be done was rebalance the tires. Troubleshooting 101: start with the easy things first!! Also I am running a 6" suspension lift, no spacers. While the jeep...

I'm running my tires at 30 PSI....ill let my shop know to lower them. They also suggested balancing the wheels (haven't had that done in a few off road trips and I knocked off some of the fake beadlock on the wheels). They will also be checking every bushing and putting the stock pitman arm back...

OK I dropped the jeep back off at the shop. I ordered new shocks while I was at it (couldn't take the ride and hope the new shocks help with that) and will be sure to remove the drop Pitman arm. Thanks again guys!

Thanks for the quick reply guys! 1. There is a drop Pitman arm. 2,3. What's the best way to check for bad bushings? Jack it up?

Ok first just want to say I did my reading, and I feel as I may be making some headway, but I am still a bit lost. First off- 06 tj, 6 spd, 6" RC lift (Please don't hate LOL), 35's Recently had my shop, fairly reputable, install a used Dana 44. When driving any speed above 15 mph if I hit a bump...

Yes. Glue pulling won't work if it's a very sharp Dent. Hope it works out for you

I am a PDR Tech and have been for over 6 years. My dad, a 23 year PDR Tech, taught me how to do it years ago. Inaccessible areas like roof rails on regular cars can only be glue pulled without drilling a hole. I've taken a few Dents out of my jeep but nothing on the rocker. I know sometimes in...

I have all 4 springs from a 4" Rough Country X-series lift kit. I bought the 4 inch kit thinking it would be tall enough, but I needed another 2 inches to accommodate my 35's. The only difference between the 4" and 6" lift is the springs, so theses were only installed for 3 days on my jeep...

Yep that's the kit. RC Said it's the correct bar. So, A: the shop put the new trackbar bracket in the wrong spot. Or B: my frame got twisted. I don't think it's B, so it looks like I'm cutting.

I'd rather not cut the track bar if I don't have to. I'm going to give rough country a call and see what they say. Hopefully they'll just send me the correct one and swap mine out. If not looks like I'll be cutting. Thanks for all the help!

Yea The shop definitely wasn't too keen on doing lift kits. And the track bar came with the lift kit and is fully adjusted in. If I cut it, will I need tto tap more threads into it?

Alright so just got my 4" rough country lift installed. It is the short arm lift with all control arms and trackbars. Anyway, for some reason the shop that installed it said the front trackbar is fully adjusted and the axle is now no longer centered. It sits about 3/4ths of an inch to the right...

Still have them!!

Hey putting up my 33' Nitto Terra Grapplers. I have all 5. 4 have 75% tred left, the 5th has never been used. No plugs or curb rash!! Only selling because I bought 35's and need these gone. Pick-up only. Willing to drive to meet if need be. Cash only LOOKING FOR $1500 OBO Any questions please...