slip yoke eliminator

Currently have a 4 inch lift on my 97 TJ and am planning on doing the tummy tuck at one point but for now I know I need a Slip Yoke Eliminator kit, since I plan on doing a tummy tuck down the line what kit would be the best suited for me? There looks to be quite a bit of SYE kits out there and...

So I lost my rear stock shaft last week. The stock shaft was ok before, or do I upgrade to an Adems and a SYE. OR is there a 3rd op. Is there a upgrade rear drive shaft with the yoke. Why would I want to do the SYE. any Info and opinion's welcome and helpful.

I have a 2002 Jeep Wrangler that has a Pro Comp 2 inch lift with 32 in tires. Ever since the lift and tires there has been a vibration, mainly from my seat and center console, that starts at 50mph and gets worse and worse as I go faster to the point where the vibrations shake the mirrors where I...

1999 Jeep Wrangler TJ 4.0L 5spd MT Located 30 minutes from Houston 90,500 miles 6” (Rubicon Express, I think) Long Arm Lift w/ 8” Fox Shocks No body lift 35x12.50R15LT BFG KM2 w/ matching spare Custom rear tire rack & step bars Currie HD 1 ton tie rod system Warn HS9500I Kilby on board...

I want to install a SYE kit in my jeep and am looking for someone with a similar setup to mine who has done so and curious what their yoke to yoke distance was. I would like to get an adams driveshaft and i understand that the ideal way is to measure once the SYE is installed but I live in...

Bought these for my NP231 but going with a 241 Rubicon case instead, thus, I no longer need this. Both items are brand new in the box. This is from Advance Adapters. It's their 50-7097 short SYE kit with a 1300 series flange yoke for use with CV and NON-CV type custom driveshaft. This won't...

Hey guys, have a brand new in the box Advance Adapters 507906 NP231 Fixed Yoke Kit I accidentally bought 2 and cant return the other one. Im located in LA Area , North Hollywood specifically. $200, open to trades possibly. any questions lemme know !If you need a picture let me know ! but its...

I purchased a 2003 Rubicon with about 4.5" of lift installed. From what I can tell it looks like a stock rear driveshaft. The driveshaft looks like it is at a very steep angle. So in general I know that once you hit 4" of lift it is usually best to install a slip yoke eliminator. Of course the...

These are instructions for replacing the output shaft on a np231 transfer case and installing a Slip Yoke Eliminator. This is intended as a guide line only. During the installs we used two different kits an Advanced Adapters and Bayou Geep kit. The two kits are similar but, the minor differences...

This thread is designed for the sole purpose of informing members as to why it is important to put a SYE on your lifted Jeep Wrangler. Now we can answer the “Do I need a SYE” questions by simply pointing people to this thread. I hope this thread will help new members make the right choice when...