I really like these too. And with the narrower tires now I don’t have any rubbing at full turn.Looks Great! The JL wheels really are much nicer than the JK ones.
I really like these too. And with the narrower tires now I don’t have any rubbing at full turn.Looks Great! The JL wheels really are much nicer than the JK ones.
View attachment 59113View attachment 59112 A little dirty, but here she is.
Are you not planning on keeping this wheel and tire set? If so I’m interested.This is mine with factory JK moabs...
View attachment 52397
I used a 1.25" thick adapter. If I were going to keep them, I'd move them out with a 2" spacer. The nice thing with the 1.25" is that they will fully stuff under the flare.
Sorry, I've sold them already. Thanks for the interest though! Should be easy to find a set local to you though...I only paid 125 bucks for the 5 wheels. Found the tires separately for 500.Are you not planning on keeping this wheel and tire set? If so I’m interested.
Hi Chris, I followed this link last week and it gave me Rocktrix spacers, now it shows ECCPP. Not sure if Amazon is pulling a switch out or not. Either way, the Rocktrix seem good, but I would like to see more threads engaged. I count 8.5. Is it common to have that many unused threads on the lugs? Pic below. Sorry if it's upside down.You need 5x4.5 to 5x5 wheel spacers.
These are the ones I am running on my JK wheels which I have on my TJ:
https://www.amazon.com/gp/product/B01IVKIZW0/?tag=wranglerorg-20
Hi Chris, I followed this link last week and it gave me Rocktrix spacers, now it shows ECCPP. Not sure if Amazon is pulling a switch out or not. Either way, the Rocktrix seem good, but I would like to see more threads engaged. I count 8.5. Is it common to have that many unused threads on the lugs? Pic below. Sorry if it's upside down. View attachment 138332
Just my opinion, but if you do much offroading, I wouldn't recommend drilled & slotted rotors.Very well, back to Amazon they go. ECPP it is...
Thanks and I plan to become a supporting member. This forum has been a gold mine of information!
The ECCPP fit a little more snug over the hub than the Rocktrix, so that's good. Now I get 9.5 turns, maybe close to 10 when torqued to 95 ft-lbs. That and some red thread-locker and I'm good. Thanks!View attachment 138571
Will do. I leave on May 3 to drive it to Penn State where it will remain for years. Its on my checklist.
Are these the wheel spacers you are using ?The ECCPP fit a little more snug over the hub than the Rocktrix, so that's good. Now I get 9.5 turns, maybe close to 10 when torqued to 95 ft-lbs. That and some red thread-locker and I'm good. Thanks!View attachment 138571