Ok this is what is going on. When the jeep is cold the issue is still present but not as bad. I really have to mash on the breaks to make the jeep stall out. After the jeep heats up I can can put a little extra pressure on the breaks and it stalls out. Sometimes the rpm will drop to 0 and then come back to normal and not stall, but most of the time it just stalls out. The way I drive is to shift to neutral releases the clutch then break. Any other ideas myself and one mechanic are at a loss?
Things I have had changed. IAC, TPS, throttle body BBK, crank position sensor, purge valve, smoke test and vacume is holding at -15, injectors, plugs, ignition coil, fuel pressure steady at 50, power brake booster was not replaced but it was tested. Other than throttle body all parts are mopar
Things I have had changed. IAC, TPS, throttle body BBK, crank position sensor, purge valve, smoke test and vacume is holding at -15, injectors, plugs, ignition coil, fuel pressure steady at 50, power brake booster was not replaced but it was tested. Other than throttle body all parts are mopar