Can't figure out how to install these grab handles

nitrofalcon

nitrofalcon

TJ Enthusiast
Supporting Member
Joined
Jul 14, 2023
Messages
420
Location
Waynesboro, VA
I already have these in my 01 tj sport and love them. So, I got a pair for my new 03 Sahara but can't see the attachment points/bolts to fasten to. Is it because the 03 Sahara has plastic covers over the pillars? Do I need to somehow detach them, put the grab handles on and then trim the covers and re-attach? I sure hate to trim them.

61XnQOpMNQL._AC_SL1500_1225x.jpg


images.jpeg
 
jjvw said:
Do a search for GraBars, which are the original product your handles are Chinese copies of. You will find the instructions for cutting holes in the 03-06 windshield surround.
Click to expand...

Holy cow! $175 for the GraBars! GraBars seem to be a different design, and, I only need the front set. So, are saying my Chinese version won't work and should return?
 
  • Face Palm
  • Haha
Reactions: John Cooper and JMT
  • Like
Reactions: John Cooper and nitrofalcon
L J said:
the TJ GraBars were $80

no, your knock-offs are a direct copy of the TJ GraBars

the TJ GraBars were only offered for the front

they should fit but you never know with chinesium
Click to expand...

Thanks, big guy. I'll look at GraBars site again. I obviously missed on all points. 😊
 
nitrofalcon said:
Holy cow! $175 for the GraBars! GraBars seem to be a different design, and, I only need the front set. So, are saying my Chinese version won't work and should return?
Click to expand...

The install on yours is the same as the original. The information is out there.

Here is some discussion of what happens when too many people don't want to pay money for a good product.

Thread 'Grabar USA - out of production?' https://wranglertjforum.com/threads/grabar-usa-out-of-production.73181/
 
  • Like
Reactions: L J and nitrofalcon
Make a vertical pencil line 7 1/4" (measure on the straight/flat side that is closest to the windshield) from the end of the tab that tucks into the center trim piece. Then measure 2 inches down the line (again measured from the straight side that sits closest to the windshield towards the curved side), and make a center mark there. Drill a 1 1/2 inch hole saw at that point. After drilling install this grommet: https://www.amazon.com/gp/product/B06XKH4Z89/?tag=wranglerorg-20

gb1.jpg


gb2.jpg


gb3.jpg
 
  • Like
Reactions: nitrofalcon and psrivats
zebra12 said:
Make a vertical pencil line 7 1/4" (measure on the straight/flat side that is closest to the windshield) from the end of the tab that tucks into the center trim piece. Then measure 2 inches down the line (again measured from the straight side that sits closest to the windshield towards the curved side), and make a center mark there. Drill a 1 1/2 inch hole saw at that point. After drilling install this grommet: https://www.amazon.com/gp/product/B06XKH4Z89/?tag=wranglerorg-20

View attachment 537733

View attachment 537734

View attachment 537735
Click to expand...

Wow! Great instructions and pics. Thanks so much.
 
  • Like
Reactions: zebra12
Top Bottom
Back