Help me figure out what I did wrong with what seems to be a very straightforward installation.
I wired the power to the CB directly from the connection block behind the fuse block under the hood and grounded to one of the chassis bolts in the glovebox.
The CB is getting all kinds of feedback when the engine is running that increases as the RPM increases. I tested by running a ground directly to the battery and that didn't help at all.
Any thoughts on where the problem is and what I may need to do to fix? This all seemed so easy so a little stumped here.
I wired the power to the CB directly from the connection block behind the fuse block under the hood and grounded to one of the chassis bolts in the glovebox.
The CB is getting all kinds of feedback when the engine is running that increases as the RPM increases. I tested by running a ground directly to the battery and that didn't help at all.
Any thoughts on where the problem is and what I may need to do to fix? This all seemed so easy so a little stumped here.