Control arm bracket

[ted johnston]

97 Wrangler, Lower rf @axle control arm bracket is not 90° w/axle housing. Is it bent? Correct?.the Jeep had alotta of bent suspension when I got it. It's a slight angle, 20° ? Max

 

[toximus]

It should be angled to be pointed at the mount on the frame.

 

[ted johnston]

It should be angled to be pointed at the mount on the frame.

Looking from front of the Jeep, the mount is angled as that the bolt through the arm and bracket is not parallel with the front axle.

 

[Mike_H]

Pictures would help tremendously here.

 

[Boinked]

I alwas wanted to use this smiley

 

[ted johnston]

I alwas wanted to use this smiley

Could guessed you were a Yankee! Mesa, smh .

 

[ted johnston]

Pictures would help tremendously here.

I'll try post some shortly. Thanks.

 

[ted johnston]

I'll try post some shortly. Thanks.

I'll try post some shortly. Thanks.

 

[Mike_H]

Yeah, that doesn't look right. Those bolts should be parallel with the axle, if I'm not mistaken.