J R Here for the food. Supporting Member Joined Sep 11, 2018 Messages 491 Location Henderson, NV Dec 18, 2019 #1 Is there an ideal torque spec for the drag link adjustment sleeve clamps and the tie rod clamps? Last edited: Dec 18, 2019
Jerry Bransford Too many arguments and personal attacks, I'm done. Supporting Member Joined Nov 9, 2015 Messages 29,739 Location Fleming Island FL Dec 18, 2019 #2 Here's a good install description by Stu. No need to get the tie rod clamps all that tight, they just hold the tie rod from rotating after the toe-in is set. https://www.stu-offroad.com/steering/currie/steering-1.htm
Here's a good install description by Stu. No need to get the tie rod clamps all that tight, they just hold the tie rod from rotating after the toe-in is set. https://www.stu-offroad.com/steering/currie/steering-1.htm
John Scoggins TJ Enthusiast Joined Oct 23, 2018 Messages 528 Location Houston, TX Dec 19, 2019 #3 If you need a number for the stock parts:
OP J R Here for the food. Supporting Member Joined Sep 11, 2018 Messages 491 Location Henderson, NV Dec 19, 2019 #4 Good info! Thanks Guys!