I while back I tried pulling out of the driveway and the left rear locked. I looked for a hardware kit for the E-brake with no luck. Anyone have a lead?
E-brake hardware for disc brakes
- Thread starter Brianj5600
- Start date
DELCO PART #18K1634 OR CARLSON PART # H7328 NAPA PART # UP 3105
SHOULD BE ABLE TO FIND ONE OF THOSE LOCALLY.
SHOULD BE ABLE TO FIND ONE OF THOSE LOCALLY.
I'd check if the cable seized before replacing the backing plate assembly. Iirc the backing plate assemblies have a nationwide shortage going on.
You may need to remove the parking brake pads until a new assembly becomes available. (I'd ask Blaine if you can get on his waiting list.)
You may need to remove the parking brake pads until a new assembly becomes available. (I'd ask Blaine if you can get on his waiting list.)
OP
The tire rolled about 1/2 rotation and it hit a hard stop. I took the rotor off and the were mangled springs and witness marks on the heads of the wheel studs. I took all of the e-brake pieces out and it rolled fine.
Thanks!