Eaton e-locker part number for Dana 30 with 4.56 gears?

06lj said:
You have the correct part number. I don't see that Amazon carries it but there are many other retailers that show it in stock. Summit Racing has 10 in stock for $1,160.00
https://www.eaton.com/us/en-us/skuPage.19818-020.specifications.html

https://www.summitracing.com/parts/...2U2KDOxcO6YVVdVoGDpjRJ7ODQi9hbFwaAltjEALw_wcB
Click to expand...

Thanks brother... just pulled the trigger on @summitracing.com for the locker plus master install kit (don't know if I need it using the same gears)..but it was a decent price😀
 
  • Like
Reactions: FarminAg and 06lj
I wish I was good at sending links. Just a picture

IMG_0417.png
 
  • Like
Reactions: TJ Starting
Are you doing gears yourself? You’ll want set up carrier bearings if so. The carrier bearings on your existing Dana 30 won’t work on the Eaton Dana 30. iirc, Eaton Dana 30 carrier bearings are same as Dana 44. But someone else here can correct me.

(You don’t have to have setup bearings but it makes the job way easier).
 
kameronkales said:
Are you doing gears yourself? You’ll want set up carrier bearings if so. The carrier bearings on your existing Dana 30 won’t work on the Eaton Dana 30. iirc, Eaton Dana 30 carrier bearings are same as Dana 44. But someone else here can correct me.

(You don’t have to have setup bearings but it makes the job way easier).
Click to expand...

So the Eaton master diff kit is definitely needed correct?
 
You certainly need most of it-carrier bearings and associated shims, new ring gear bolts. Someone who has reused gears needs to chime in on how pinion depth and such will change with the new Eaton carrier.
 
  • Like
Reactions: 06TJ35's
Top Bottom
Back