Front seat brackets

Marc L

TJ Enthusiast
Supporting Member
Joined
Aug 12, 2017
Messages
108
Location
Renton, WA, United States
In my 2002 TJ it seems to me the seats should slide back farther but they are at the end of their rack. I'm not overly tall 6' but my legs and arms are all bent and it's not the most comfortable to drive. Are there any fixes or aftermarket brackets for this?
Thanks in advance!
 
Today I installed these brackets. Very simple install. A few hints to help out though. On the back bolts that use the Torx I would suggest going and buying a hex head for these. ( Grade 8 ). After the seat is attached it is impossible to tighten the passenger side one but with a hex head you would be able too. I had to snug them down, make sure the seat sat properly on them then remove the seat and tighten the bolts in order to get to them.
My Drivers side seat went from 4" fully forward to 8" and all the way back went from 11" to 15" all the way back. I'm 6' so with the seat all the way back it is actually to far and had to move up a bit [/ATTACH]
IMG_7580.jpg
IMG_7581.jpg
IMG_7583.jpg
IMG_7584.jpg