Gauge cluster going crazy

[Kelly F.]

Hi all! I haven't driven my Jeep in about a week, he cranked right up and I noticed the dash cluster going crazy. ODOMETER showing an error, airbag light coming on, the MPH and RPM flickering or working and not working. Any thoughts? Wiring issue, battery issue, or just another Jeep thing? My gas gauge hasn't worked since I bought it, but think it's a sensor issue and the fuel pump that needs to be replaced.

I have videos but can't seem too attach since the file is too large.

 

[Jerry Bransford]

I'd start by removing the instrument cluster and reseating its multi-pin electrical connectors in the back. They might have come loose or are a little dirty.

 

[Kelly F.]

I'd start by removing the instrument cluster and reseating its multi-pin electrical connectors in the back. They might have come loose or are a little dirty.

I'll YouTube it. Fairly easy to pull apart? Most everything else I've done has been pretty easy.

 

[Jerry Bransford]

I'll YouTube it. Fairly easy to pull apart? Most everything else I've done has been pretty easy.

Very easy, you just need a medium-size phillips head screwdriver to take the bezel off and the couple phillips head screws holding the cluster in place.

 

[Kelly F.]

Very easy, you just need a medium-size phillips head screwdriver to take the bezel off and then remove the couple phillips head screws holding the cluster in place.

Awesome thank you! I'll work on it this weekend.